Millisecond Forums » Millisecond Forums » Inquisit 4 » Administering 3 single-category IATs in the middle of a Qualtrics survey

Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Fri, 09 Oct 2015 14:36:06 GMT

I have read all previous threads on integrating Inquisit tasks into Qualtrics surveys on this forum as well as instructional pages provided by both Millisecond (http://www.millisecond.com/support/docs/v4/html/howto/interopsurveys.htm) and Qualtrics (http://www.qualtrics.com/university/researchsuite/developer-tools/api-integration/passing-information-through-query-strings/), but I am simply confused... I also called the Qualtrics support center, but they don't know how it is accomplished, either. I sent them all the relevant threads from this forum so that they can look into what I need to do on my Quatrics survey's side, but it has been a week since I sent them the information, and I have yet to hear from them. Can anyone walk me through step-by-step what I need to do on both the Qualtrics' and Inquisits' sides to make my study work? Below, you will find the basic procedure of my study:

1. Participants will complete several measures on Qualtrics
2. Participants will be re-directed to Inquisit web 4 to complete all 3 single-category IATs in a random order
3. Participants will be re-directed back to Qualtrics to complete the rest of the survey

And, this is what I have done so far:
1. Created an entire survey on Qualtrics. But, this survey has an empty block to which a link to Inquisit web 4 tasks should be inserted
2. Created three separate scripts for single-category IATs (modified version of the script developed by K. Borchert)
3. Created a separate script for <batch> command to randomize the presentation order of three IATs (this script can be found here: https://www.millisecond.com/forums/Topic17047.aspx)

Based on my reading, I know I need to have Qualtrics generate unique ID as participants start completing the survey and that unique ID as a URL query parameter must be passed to and from Inquisit so that participants do not have to manually enter their unique code on each site. But, how do I get that URL query parameter? How does it look like? When I call the Qualtrics support center next time, what is the right way to ask this question?

I also understand that I need to enter that URL query parameter while I am setting up the Web Script Wizard. But, where exactly do I have to put the information? Again, how does the URL that is supposed to be entered during the Web Script Wizard look like?

Thank you for your time and help in advance!

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Fri, 09 Oct 2015 14:36:06 GMT

Adding a little more information I've been able to glean from the logs: The error referenced in the screenshot occurred with the script "SingleTargetIATBlack.iqx", which was the final script in the condition the respective participant was assigned to. I've pulled all the scripts from the server and the files that are up there currently are encoded just fine and run as expected as far as I can tell. There also isn't any error in the script's instructions <trial>. That may mean that the file was corrupted during the download, which is rare but can happen. Hope this helps.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Fri, 09 Oct 2015 13:59:37 GMT

The message suggests a mistake in the respective script, specifically it indicates tht in <trial instructions> no valid response is defined. A <trial> can only accept "no response" if a timeout or fixed trialduration is specified -- otherwise the <trial> would never end.

If you look at the errors in your logs at https://www.millisecond.com/myaccount/logs/errors.aspx?webscriptid=9856&webscriptname=batchcommand , those suggest that the encoding of your *.iqx files is botched. If you review this very thread, you'll also notice that this isn't the first time this happened with scripts you edited and uploaded. All the errors, including the one depicted in the screenshot, likely stem from this fact. The files are not valid and Inquisit consequently can't parse and execute them properly.

I'd like to know why that is, hence my question: Are you using Inquisit 4 Lab to edit those files or are you using some other application?

Thanks!

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Fri, 09 Oct 2015 12:18:15 GMT

One of my students got the following error message after completing one of the three IATs. What does it mean?

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Mon, 28 Sep 2015 05:20:34 GMT

The problem is that there is nothing on the Inquisit side that would produce such a message ("outdated session"). Inquisit does not do any session management. I'm afraid Qualtrics staff is mistaken here.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Mon, 28 Sep 2015 05:13:50 GMT

I have already talked to the Qualtrics, and they think the issue 1 ("outdated" message) is on the Inquisit side...

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Mon, 28 Sep 2015 05:03:37 GMT

#1 sounds like a Qualtrics issue to me.
No idea about #2, unfortunately.
#3 could be a Qualtrics issue as well. Alternatively, I've seen a few cases where for some reason query parameters are lost when (1) the person is using Internet Explorer 11 and (2) the web player launch method. If this is the case, workarounds would be either (a) using a different browser or (b) using a different launch method (several alternatives are available for IE).

Hope this helps.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Mon, 28 Sep 2015 02:50:54 GMT

Right... I am pretty sure that the student meant "pressing" not clicking. Six other students were able to complete the IATs with no "I" and "E" issue, so I am 100% it is not a script issue.

There are other issues reported by the students over the weekend:
- 1 student reported that she received a pop-up message about the session being outdated after she was done downloading the program at the beginning of the study. But, when she clicked "ok" the Qualtrics survey started with no problem.
- 1 student reported that he was not able to download Inquisit and received the same error message that I mentioned earlier on this thread. He uses Windows 7. Previously, I had this issue when I tried to redirect participants to https://www.millisecond.com/download/inquisitweb4.aspx. This time, I had JavaScript embedded into the Qualtrics survey instead of posting the typed link. Of multiple students test-running my study, he was the only one who has not been able to download the program.
- 2 students reported that the second Qualtrics survey did not come up after IATs.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Sun, 27 Sep 2015 05:18:14 GMT

No idea offhand. First of, as far as I can see the script doesn't require *clicking* E or I, but rather *pressing* the E or I key on the keyboard. I'm also not sure what "CTRL + E" should do. Unless it's specified as a custom /quitcommand, that key combo should not do anything (the standard key combinations are CTRL+B to skip a block and CTRL+Q to terminate the entire script).

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Sun, 27 Sep 2015 05:18:14 GMT

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Sat, 26 Sep 2015 05:48:56 GMT

I am having several of my RAs test run the study, and I got the following message from one of them: "I had trouble downloading the application needed to proceed to the other portion of the study and also had trouble when clicking the E and I, it wasn't working when i clicked them so i had to hold " ctrl + E." No one else had the issue with I and E, so I don't think it is the script... Any idea?

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Fri, 25 Sep 2015 07:45:19 GMT

We'll surely be looking into this, but as I already said I haven't been able to reproduce this so far, i.e., I'm not seeing any error message under 64-bit. So there's probably some additional factor involved (e.g. a specific browser or browser version or other system characteristic) that I'm not catching.

Thus, for the time being, the direct links are the best option I have to offer.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Fri, 25 Sep 2015 07:22:16 GMT

The second link worked! But, if I used these direct links, participants need to know whether their PC is 32 or 64.... Can you look into why the general download link was not working?

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Fri, 25 Sep 2015 06:16:15 GMT

I don't know why you get that error message and I've been unable to reproduce it. Inquisit works fine under 64-bit Windows. The only alternative I can suggest is providing direct download links to your participants. Those are

32-bit Windows:
https://www.millisecond.com/download/4/4_0_8_0/player/win32/IQWebPlayerSetup.exe

64-bit Windows:
https://www.millisecond.com/download/4/4_0_8_0/player/win64/IQWebPlayerSetup.exe

OSX:
https://www.millisecond.com/download/4/4_0_8_0//player/mac/Inquisit_Web_Player_4080.dmg

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Fri, 25 Sep 2015 05:10:21 GMT

Thanks. There is another question: I get an error massage when I try to download Inquisit 4 Web from the the link you provide for participants to download Inquisit 4 Web (https://www.millisecond.com/download/inquisitweb4.aspx). The message says "Inquisit 4 Web Player cannot be installed on Windows XP/Vista/Windows 7/Windows 8x64. I think many participants would be using Windows 7/8 x64...

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Thu, 24 Sep 2015 14:03:39 GMT

There is nothing you need to configure on the Inquisit end. Any and all query parameters that come in to the launch page will automatically be appended to the outgoing URL when Inquisit redirects (here: back to Qualtrics / the 2nd Qualtrics survey).

I.e. if you pass two query parameters from the 1st Qualtrics survey to the Inquisit launch page, Inquisit will keep those parameters when it bounces you to the 2nd Qualtrics survey. Whether you have Inquisit Web *use* one, both or none of those parameters does not matter.

What you will have to do, though, is the changes you made to the scripts' <expt> elements discussed earlier in this thread:

https://www.millisecond.com/forums/FindPost17150.aspx

Those changes were necessary to get *rid* of incoming query parameters upon redirection (which is what you wanted / needed at the time). Now you'll want to *keep* incoming query parameters.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Thu, 24 Sep 2015 13:31:36 GMT

I talked to the Qualtric support center, and they said it would possible to specify the condition for the second survey if we can attach more than one query parameters to the end of the URL that will redirect participants from Inquisit back to Qualtrics. We would be to attend Response ID as well as the condition parameter. How can I set this up on the Inquisit end? I see a box to enter the name of the url query parameter that contains the subject id in the Web Script Wizard. Where should I put the the url query parameter that contains the condition?

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Tue, 22 Sep 2015 07:06:16 GMT

> After test-running the study, we found that the transition from/to Qualtrics is not as smooth and carefree as we hoped... So,the
> major issue is that, once participants are done with the IATs, they are brought back to the last Qualtrics page they were on
> with the link to Inquisit. During the test run, some of my research assistants thought that a page popped up after IATs was a
> new one with a new link so they clicked on the link again only to found that they were brought back to Inquisit for the second
> time. Assuming that not all participants will be reading the instructions very carefully, this mistake would like to happen to
> multiple people.

You may want to explore options for resolving this on the Qualtrics-side. E.g. disable the link after a short period of time using JavaScript.

> Based on my conversation with a Qualtric specialist, in order to pass condition query, we need to be able to enter four URLs
> (one for each of the four experimental conditions).

I don't believe this is accurate and would recommend going over this with Qualtrics support again. Qualtrics should be perfectly capable of (1) extracting the value of the condition query parameter passed back and forth and (2) adjusting the survey flow according to that value (i.e., administer a set of questions based on the condition), all within a single survey.

> Finally, I would like participants to install Inquisit program immediately after consenting. I remember there was a thread on this
> topic discussing an exact command that we need to insert to achieve that. But, it seemed like those posted commands were
> not working [...]

The topic you are referring to is https://www.millisecond.com/forums/Topic13622.aspx and the commands therein are working (see the various responses for code using the Web Player instead of the plugin as well as how to test the code). It may be that Qualtrics imposes constraints on custom / 3rd party JavaScript on their platform, but I do not know that. Qualtrics support should be able to provide specifics if so. Alternatively, direct your participants to https://www.millisecond.com/download/inquisitweb4.aspx prior to the Qualtrics survey or embed that page at the start of your survey.

Hope this helps.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Tue, 22 Sep 2015 06:50:44 GMT

After test-running the study, we found that the transition from/to Qualtrics is not as smooth and carefree as we hoped... So, the major issue is that, once participants are done with the IATs, they are brought back to the last Qualtrics page they were on with the link to Inquisit. During the test run, some of my research assistants thought that a page popped up after IATs was a new one with a new link so they clicked on the link again only to found that they were brought back to Inquisit for the second time. Assuming that not all participants will be reading the instructions very carefully, this mistake would like to happen to multiple people.

Ideally, we would create two surveys as you suggested previously: pre-Inquisit and post-Inquisit. However, there are two issues with this approach. First, participants will be randomly assigned to one of four experimental conditions in the pre-Inquisit survey, and the last part of the post-Inquisit survey would depend of the condition participant received in the pre-Inquisit survey. So, we need to pass condition information as query, in addition to response ID, back and forth between Qualtrics and Inquisit. But, the second issue is that Inquisit allows us to enter only one URL to re-direct us back to Qualtrics. Based on my conversation with a Qualtric specialist, in order to pass condition query, we need to be able to enter four URLs (one for each of the four experimental conditions).

Finally, I would like participants to install Inquisit program immediately after consenting. I remember there was a thread on this topic discussing an exact command that we need to insert to achieve that. But, it seemed like those posted commands were not working, and I don't think working command was ever posted, if I remember correctly... Can you please let me know the exact command and where I need to insert that command? Thanks!

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Thu, 17 Sep 2015 06:24:45 GMT

I think it is working now. Thank you again for your assistance. I will have several students test run it this week. If we see additional issues, I will definitely come back to this thread. But, again, thanks!

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Wed, 16 Sep 2015 13:21:42 GMT

> It looks like inquisit is automatically adding the RID=ResponseID to the end of the redirect URL which is a problem

That's correct. And it's exactly what Inquisit is supposed to do by default. If Qualtrics is unable to simply ignore the query parameter, here's what you ought to do on the Inquisit side:

Modify your *scripts* (not the launch page) to set the URL to redirect to by having them set the defaults.finishpage property. In every <expt> element in each of your three IAT scripts you would add

<expt>
/ onexptbegin = [defaults.finishpage = "https://qaz1.az1.qualtrics.com/SE/?SID=SV_aVJsIxvLV4UViFD"; ]
...
</expt>

That will get rid of any and all query parameters that originally went into the launch page.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Wed, 16 Sep 2015 13:06:36 GMT

Rachel has been looking into this issue from the Qualtrics side, and this is what she's found:

"When I take your survey and get redirected from inquisit back to Qualtrics this is the link it redirected me to: https://qaz1.az1.qualtrics.com/SE/?SID=SV_aVJsIxvLV4UViFD&&RID=R_psXp6zEoLPozUn7
It looks like inquisit is automatically adding the RID=ResponseID to the end of the redirect URL which is a problem. This makes it a different link from the one the respondents started in, which is why it is starting a new session. We need to work with Inquisit so that they aren't automatically adding the query at the end. "

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

rachaelf — Wed, 16 Sep 2015 06:23:19 GMT

Hi Nao, that is a Qualtrics question and we can try to work something out.

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

Dave — Wed, 16 Sep 2015 05:49:14 GMT

> There is one more issue---once IATs are done, it opens a new tab and the Qualtrics survey starts from page 1 again...

I don't know which means (if any) Qualtrics provides to have a survey on their platform pick up where participants left off. This would be something Qualtrics support should be able to answer.

> I can create two separate surveys because participants will be randomly assigned to four different conditions before IATs and
> the rest of the survey after IATs depends on the condition they were randomly assigned.

A solution to this would be to forward the assigned *condition* via a query parameter as well. Your 2nd Qualtrics survey would have to be set up to read in the value of the query parameter and then progress accordingly (i.e. administer the questions pertaining to the assigned condition).

RE: Administering 3 single-category IATs in the middle of a Qualtrics survey

nhl — Wed, 16 Sep 2015 03:14:25 GMT

Thank you very much for both of your help! I test ran the survey from the beginning using the link that will be sent to participants (instead of the preview survey). There is one more issue---once IATs are done, it opens a new tab and the Qualtrics survey starts from page 1 again... I can create two separate surveys because participants will be randomly assigned to four different conditions before IATs and the rest of the survey after IATs depends on the condition they were randomly assigned.