Millisecond Forums » Millisecond Forums » Inquisit 6 » Qualtrics

RE: Qualtrics

Dave — Thu, 02 Apr 2020 23:02:35 GMT

+x[quote]

[b]kk1132 - 4/2/2020[/b]
+x[quote]

[b]Dave - 4/2/2020[/b]
+x[quote]

[b]kk1132 - 4/2/2020[/b]
Hi,

We are trying to launch a study with a customized IAT by using Qualtrics(create project)&Prolific(recruit participants).

Qualtrics only allows redirecting at the end of the survey but we are trying to see if there is any way to put IAT in the middle of the survey so that we can counterbalance the order effects (e.g., 1. external item -> demo items -> IAT 2. IAT -> demo items -> external).

I saw this below in one of the previous posts ,

"Yes. The most robust way to do this is for you to set up two Qualtrics surveys:
Qualtrics survey 1 (pre-IAT) is where participants start. From there redirect to your Inquisit experiment's start page as detailed at https://www.millisecond.com/support/docs/v5/html/howto/interopsurveys.htm under "Sending Subject IDs from 3rd Party Site to Inquisit". Then, in your Inquisit experiment's settings, specify the URL of Qualtrics survey 2 (post-IAT) as the URL to redirect to. Inquisit will automatically preserve and forward the original survey respondent ID (generated by Qualtrics survey 1) to the 2nd Qualtrics survey. Have that survey read in the ID (see https://www.qualtrics.com/support/survey-platform/survey-module/survey-flow/standard-elements/passing-information-through-query-strings/#PassingInformationIntoASurvey ) and you have a single ID across all three parts which you can use to match the data. "

But this seems to be a good solution for only one way order effect. (but not randomizing the order.)

Would there be any good way to do it?
Thanks!

[/quote]

You can just put a link to the IAT in the middle of the survey and not use any redirection.
[/quote]

In that case, how would we share the participants' ID # between both websites like we do by using redirect and add parameter (https://www.millisecond.com/support/docs/v6/html/howto/interopsurveys.htm)??
[/quote]

In the same way, the query parameter goes into the clickable link you put on the page in the survey. And instead of redirecting back to Qualtrics from Inquisit, you'd merely instruct participants to return to the (still open and active) survey and move on.

How to put a hyperlink on a page in Qualtrics is explained here:
https://www.qualtrics.com/support/survey-platform/survey-module/editing-questions/rich-content-editor/insert-a-hyperlink/

The link target is the URL for your IAT with the Qualtrics ID piped in just like explained in the documentation.

Qualtrics

kk1132 — Thu, 02 Apr 2020 22:46:18 GMT

Hi,

We are trying to launch a study with a customized IAT by using Qualtrics(create project)&Prolific(recruit participants).

Qualtrics only allows redirecting at the end of the survey but we are trying to see if there is any way to put IAT in the middle of the survey so that we can counterbalance the order effects (e.g., 1. external item -> demo items -> IAT 2. IAT -> demo items -> external).

I saw this below in one of the previous posts ,

"Yes. The most robust way to do this is for you to set up two Qualtrics surveys:
Qualtrics survey 1 (pre-IAT) is where participants start. From there redirect to your Inquisit experiment's start page as detailed at https://www.millisecond.com/support/docs/v5/html/howto/interopsurveys.htm under "Sending Subject IDs from 3rd Party Site to Inquisit". Then, in your Inquisit experiment's settings, specify the URL of Qualtrics survey 2 (post-IAT) as the URL to redirect to. Inquisit will automatically preserve and forward the original survey respondent ID (generated by Qualtrics survey 1) to the 2nd Qualtrics survey. Have that survey read in the ID (see https://www.qualtrics.com/support/survey-platform/survey-module/survey-flow/standard-elements/passing-information-through-query-strings/#PassingInformationIntoASurvey ) and you have a single ID across all three parts which you can use to match the data. "

But this seems to be a good solution for only one way order effect. (but not randomizing the order.)

Would there be any good way to do it?
Thanks!

RE: Qualtrics

kk1132 — Thu, 02 Apr 2020 22:23:36 GMT

+x[quote]

[b]Dave - 4/2/2020[/b]
+x[quote]

[b]kk1132 - 4/2/2020[/b]
Hi,

We are trying to launch a study with a customized IAT by using Qualtrics(create project)&Prolific(recruit participants).

Qualtrics only allows redirecting at the end of the survey but we are trying to see if there is any way to put IAT in the middle of the survey so that we can counterbalance the order effects (e.g., 1. external item -> demo items -> IAT 2. IAT -> demo items -> external).

I saw this below in one of the previous posts ,

"Yes. The most robust way to do this is for you to set up two Qualtrics surveys:
Qualtrics survey 1 (pre-IAT) is where participants start. From there redirect to your Inquisit experiment's start page as detailed at https://www.millisecond.com/support/docs/v5/html/howto/interopsurveys.htm under "Sending Subject IDs from 3rd Party Site to Inquisit". Then, in your Inquisit experiment's settings, specify the URL of Qualtrics survey 2 (post-IAT) as the URL to redirect to. Inquisit will automatically preserve and forward the original survey respondent ID (generated by Qualtrics survey 1) to the 2nd Qualtrics survey. Have that survey read in the ID (see https://www.qualtrics.com/support/survey-platform/survey-module/survey-flow/standard-elements/passing-information-through-query-strings/#PassingInformationIntoASurvey ) and you have a single ID across all three parts which you can use to match the data. "

But this seems to be a good solution for only one way order effect. (but not randomizing the order.)

Would there be any good way to do it?
Thanks!

[/quote]

You can just put a link to the IAT in the middle of the survey and not use any redirection.
[/quote]

In that case, how would we share the participants' ID # between both websites like we do by using redirect and add parameter (https://www.millisecond.com/support/docs/v6/html/howto/interopsurveys.htm)??

RE: Qualtrics

Dave — Thu, 02 Apr 2020 21:19:11 GMT

+x[quote]

[b]kk1132 - 4/2/2020[/b]
Hi,

We are trying to launch a study with a customized IAT by using Qualtrics(create project)&Prolific(recruit participants).

Qualtrics only allows redirecting at the end of the survey but we are trying to see if there is any way to put IAT in the middle of the survey so that we can counterbalance the order effects (e.g., 1. external item -> demo items -> IAT 2. IAT -> demo items -> external).

I saw this below in one of the previous posts ,

"Yes. The most robust way to do this is for you to set up two Qualtrics surveys:
Qualtrics survey 1 (pre-IAT) is where participants start. From there redirect to your Inquisit experiment's start page as detailed at https://www.millisecond.com/support/docs/v5/html/howto/interopsurveys.htm under "Sending Subject IDs from 3rd Party Site to Inquisit". Then, in your Inquisit experiment's settings, specify the URL of Qualtrics survey 2 (post-IAT) as the URL to redirect to. Inquisit will automatically preserve and forward the original survey respondent ID (generated by Qualtrics survey 1) to the 2nd Qualtrics survey. Have that survey read in the ID (see https://www.qualtrics.com/support/survey-platform/survey-module/survey-flow/standard-elements/passing-information-through-query-strings/#PassingInformationIntoASurvey ) and you have a single ID across all three parts which you can use to match the data. "

But this seems to be a good solution for only one way order effect. (but not randomizing the order.)

Would there be any good way to do it?
Thanks!

[/quote]

You can just put a link to the IAT in the middle of the survey and not use any redirection.

Or you can make use of Qualtrics survey flow features https://www.qualtrics.com/support/survey-platform/survey-module/survey-flow/survey-flow-overview/ which allow you to steer which parts to administer when on the basis of the value of a query parameter you can carry along back and forth between Qualtrics and Inquisit.