Millisecond Forums » Millisecond Forums » Inquisit 6 » Dot Probe task

Dot Probe task

Lakshmi — Thu, 20 May 2021 02:58:41 GMT

Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi

RE: Dot Probe task

Lakshmi — Thu, 20 May 2021 02:58:41 GMT

+x[quote]

[b]AKrishna - 5/19/2021[/b]
If you're using the test library dot probe and your issue is what I think it is, you're probably having trouble because the test library code is set up for letter and number keys only. From a quick look, if you want to use arrow keys as a response, you could add extra parameters:
[code]
<parameters>
/ responsekey_left_name = "Left arrow"
/ responsekey_right_name = "Right arrow"

/responsekey_left = 203
/responsekey_right = 205
</parameters
[code]

The test library should read the key codes correctly in the task, but for the instructions to work, you will need to replace references to parameters.responsekey_left and parameters.responsekey_right with parameters.responsekey_left_name and parameters.responsekey_right_name respectively when they appear in the instructions.

Hope this helps!
[/quote]

It helped me to set key's for my program. Thank you so much.

RE: Dot Probe task

AKrishna — Wed, 19 May 2021 11:55:14 GMT

If you're using the test library dot probe and your issue is what I think it is, you're probably having trouble because the test library code is set up for letter and number keys only. From a quick look, if you want to use arrow keys as a response, you could add extra parameters:
[code]
<parameters>
/ responsekey_left_name = "Left arrow"
/ responsekey_right_name = "Right arrow"

/responsekey_left = 203
/responsekey_right = 205
</parameters
[code]

The test library should read the key codes correctly in the task, but for the instructions to work, you will need to replace references to parameters.responsekey_left and parameters.responsekey_right with parameters.responsekey_left_name and parameters.responsekey_right_name respectively when they appear in the instructions.

Hope this helps!

RE: Dot Probe task

Dave — Wed, 19 May 2021 11:47:26 GMT

+x[quote]

[b]Lakshmi - 5/19/2021[/b]
+x[quote]

[b]Dave - 5/14/2021[/b]
+x[quote]

[b]Murakami - 5/14/2021[/b]
+x[quote]

[b]Dave - 5/13/2021[/b]
+x[quote]

[b]Lakshmi - 5/13/2021[/b]
+x[quote]

[b]Dave - 4/9/2021[/b]
+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...

[/quote]

Hello,

Thank you for your support

I understood that left and right arrow keys can set using scan code in inquisit. But I want to set in program to be used when program is running,I'm unable to set the left and right arrow keys in program as well as in keyboard scan codes. Can you help me with this ?

My program as follows..
<parameters>

/ probe = "X"
/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.
[/quote]

> But I want to set in program to be used when program is running

I don't understand what this is supposed to mean. Please explain in sufficient detail what exactly you want to do.
[/quote]
[/quote]

If there's a question here, I'm unable to locate it. Re-post it properl, please.
[/quote]

Hello Dave,

Sorry for the confusion, I'm unable to set the key scancode in our program and when i select the tools and keyscancode it will only apear codes when i press left and right arrow buttons but how can i set in program like as shown in below

/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.
[/quote]

I'm sorry, but this is exactly as unclear as the first time. Please explain in detail what exactly you want to do and what exactly is unclear to you.

RE: Dot Probe task

Lakshmi — Wed, 19 May 2021 07:16:55 GMT

+x[quote]

[b]Dave - 5/14/2021[/b]
+x[quote]

[b]Murakami - 5/14/2021[/b]
+x[quote]

[b]Dave - 5/13/2021[/b]
+x[quote]

[b]Lakshmi - 5/13/2021[/b]
+x[quote]

[b]Dave - 4/9/2021[/b]
+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...

[/quote]

Hello,

Thank you for your support

I understood that left and right arrow keys can set using scan code in inquisit. But I want to set in program to be used when program is running,I'm unable to set the left and right arrow keys in program as well as in keyboard scan codes. Can you help me with this ?

My program as follows..
<parameters>

/ probe = "X"
/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.
[/quote]

> But I want to set in program to be used when program is running

I don't understand what this is supposed to mean. Please explain in sufficient detail what exactly you want to do.
[/quote]
[/quote]

If there's a question here, I'm unable to locate it. Re-post it properl, please.
[/quote]

Hello Dave,

Sorry for the confusion, I'm unable to set the key scancode in our program and when i select the tools and keyscancode it will only apear codes when i press left and right arrow buttons but how can i set in program like as shown in below

/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.

RE: Dot Probe task

Dave — Fri, 14 May 2021 11:16:18 GMT

+x[quote]

[b]Murakami - 5/14/2021[/b]
+x[quote]

[b]Dave - 5/13/2021[/b]
+x[quote]

[b]Lakshmi - 5/13/2021[/b]
+x[quote]

[b]Dave - 4/9/2021[/b]
+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...

[/quote]

Hello,

Thank you for your support

I understood that left and right arrow keys can set using scan code in inquisit. But I want to set in program to be used when program is running,I'm unable to set the left and right arrow keys in program as well as in keyboard scan codes. Can you help me with this ?

My program as follows..
<parameters>

/ probe = "X"
/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.
[/quote]

> But I want to set in program to be used when program is running

I don't understand what this is supposed to mean. Please explain in sufficient detail what exactly you want to do.
[/quote]
[/quote]

If there's a question here, I'm unable to locate it. Re-post it properl, please.

RE: Dot Probe task

Murakami — Fri, 14 May 2021 05:07:08 GMT

+x[quote]

[b]Dave - 5/13/2021[/b]
+x[quote]

[b]Lakshmi - 5/13/2021[/b]
+x[quote]

[b]Dave - 4/9/2021[/b]
+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...

[/quote]

Hello,

Thank you for your support

I understood that left and right arrow keys can set using scan code in inquisit. But I want to set in program to be used when program is running,I'm unable to set the left and right arrow keys in program as well as in keyboard scan codes. Can you help me with this ?

My program as follows..
<parameters>

/ probe = "X"
/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.
[/quote]

> But I want to set in program to be used when program is running

I don't understand what this is supposed to mean. Please explain in sufficient detail what exactly you want to do.
[/quote]

RE: Dot Probe task

Dave — Thu, 13 May 2021 11:13:18 GMT

+x[quote]

[b]Lakshmi - 5/13/2021[/b]
+x[quote]

[b]Dave - 4/9/2021[/b]
+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...

[/quote]

Hello,

Thank you for your support

I understood that left and right arrow keys can set using scan code in inquisit. But I want to set in program to be used when program is running,I'm unable to set the left and right arrow keys in program as well as in keyboard scan codes. Can you help me with this ?

My program as follows..
<parameters>

/ probe = "X"
/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.
[/quote]

> But I want to set in program to be used when program is running

I don't understand what this is supposed to mean. Please explain in sufficient detail what exactly you want to do.

RE: Dot Probe task

Lakshmi — Thu, 13 May 2021 06:53:52 GMT

+x[quote]

[b]Dave - 4/9/2021[/b]
+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...

[/quote]

Hello,

Thank you for your support

I understood that left and right arrow keys can set using scan code in inquisit. But I want to set in program to be used when program is running,I'm unable to set the left and right arrow keys in program as well as in keyboard scan codes. Can you help me with this ?

My program as follows..
<parameters>

/ probe = "X"
/ responsekey_left = "N"
/ responsekey_right = "M"
I have to set N and M place as a left and right arrow keys in keyboard and as I'm using Mac.

RE: Dot Probe task

Dave — Fri, 09 Apr 2021 11:28:02 GMT

+x[quote]

[b]Lakshmi - 4/9/2021[/b]
Hello,

I have created a task in Inquisit with my own stimuli, but i wanted to change the key responses for dot which is left arrow and right arrow key instead of alphabets.
I have tried using response key code left(4) and right(6) for left and right key response. But i couldn't get the setting of keyboard response. Can you please suggest me to setting for setting of key responses. I'm new to Inquisit.

Thanks in advance.

Lakshmi
[/quote]

The keyboard scancode for the left arrow key is 203, the keyboard scancode for the right arrow key is 205.

See Tools -> Keyboard Scancodes...