Millisecond Forums » Millisecond Forums » Inquisit 6 » Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

LNM — Wed, 14 Apr 2021 12:48:33 GMT

Hi all,
I'm currently working on creating three different Inquisit scripts to determine the best way to collect the data. The three versions are the same, but only vary in the response style. Quick summary of the task: subjects see one word at a time, are then asked to rate this word, followed by a '!' to indicate the next word is coming etc. So: screen1 = word, screen2 = rating, screen 3 =!, screen=4 word, etc.

Here's a part of the script for each version/the elements used:

Version 1: Yes/No
<trial rating>
/ stimulustimes = [1= rating]
/ validresponse = ("j", "n")
/ branch = [trial.word]
</trial>

Version 2: Likert 1 - 5
<likert mylikert>
/anchors = [1="anchor1

"; 5="anchor5

"]
/stimulusframes = [ 1 = likertrating ]
/numpoints=5
/position= (50, 65)
/anchorwidth=120px
/fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.woord]
</likert>

Version 3: Slider 0 - 100
<slidertrial myslider>
/ stimulusframes=[1=sliderrating]
/ defaultresponse = "50"
/ required = true
/ labels=("label1", "label2")
/ range = (0, 100)
/ increment = 1
/ showticks = true
/ position= (50, 65)
/ buttonlabel = "Continue"
/ fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.word*]
</slidertrial>

*trial.word = the "!"

The scripts are working fine, however in version 3 one has to press Continue to proceed, whereas in version 1 and 2 one proceeds automatically after selecting an answer. I need this to be same for all three versions, so either a 'Continue' button for all OR all proceeding automatically after answering.

I've spent quite some time trying different ways, reading the tutorials/this forum, and from what I understand it's not possible to remove the 'Continue' button from version 3/using <slidertrial>. It also does not seem to be possible to add this button to the other 2 versions. Is there another way to do this? Any help would be much appreciated! :)

RE: Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

Dave — Wed, 14 Apr 2021 12:48:33 GMT

+x[quote]

[b]LNM - 4/14/2021[/b]
+x[quote]

[b]Dave - 4/14/2021[/b]
+x[quote]

[b]LNM - 4/14/2021[/b]
+x[quote]

[b]Dave - 4/14/2021[/b]
+x[quote]

[b]LNM - 4/14/2021[/b]
Hi all,
I'm currently working on creating three different Inquisit scripts to determine the best way to collect the data. The three versions are the same, but only vary in the response style. Quick summary of the task: subjects see one word at a time, are then asked to rate this word, followed by a '!' to indicate the next word is coming etc. So: screen1 = word, screen2 = rating, screen 3 =!, screen=4 word, etc.

Here's a part of the script for each version/the elements used:

Version 1: Yes/No
<trial rating>
/ stimulustimes = [1= rating]
/ validresponse = ("j", "n")
/ branch = [trial.word]
</trial>

Version 2: Likert 1 - 5
<likert mylikert>
/anchors = [1="anchor1

"; 5="anchor5

"]
/stimulusframes = [ 1 = likertrating ]
/numpoints=5
/position= (50, 65)
/anchorwidth=120px
/fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.woord]
</likert>

Version 3: Slider 0 - 100
<slidertrial myslider>
/ stimulusframes=[1=sliderrating]
/ defaultresponse = "50"
/ required = true
/ labels=("label1", "label2")
/ range = (0, 100)
/ increment = 1
/ showticks = true
/ position= (50, 65)
/ buttonlabel = "Continue"
/ fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.word*]
</slidertrial>

*trial.word = the "!"

The scripts are working fine, however in version 3 one has to press Continue to proceed, whereas in version 1 and 2 one proceeds automatically after selecting an answer. I need this to be same for all three versions, so either a 'Continue' button for all OR all proceeding automatically after answering.

I've spent quite some time trying different ways, reading the tutorials/this forum, and from what I understand it's not possible to remove the 'Continue' button from version 3/using <slidertrial>. It also does not seem to be possible to add this button to the other 2 versions. Is there another way to do this? Any help would be much appreciated! :)
[/quote]

In version 1 and 2, you can run a trial after the <trial rating> and <likert mylikert> respectively. That trial can display a <button> element and accept that as its response.

https://www.millisecond.com/support/docs/v6/html/language/elements/button.htm
[/quote]

Thanks for your quick reply! Would this button be present on the same screen, like this?:

[/quote]

It's a stimulus, so you can display it via the <trial>'s or <likert>'s stimulusframes in addition to the subsequent trial that actually takes the button response.
[/quote]

Thanks again, I've tried adding the button in the Likert-script and it works. However, one still automatically proceeds once a number on the Likert-scale has been selected (so right now the button is just there for show and not actually doing anything). How do I adjust the script so it does not continue until the button has been pressed as well?
[/quote]

https://www.millisecond.com/forums/FindPost31333.aspx

RE: Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

LNM — Wed, 14 Apr 2021 12:20:25 GMT

+x[quote]

[b]Dave - 4/14/2021[/b]
+x[quote]

[b]LNM - 4/14/2021[/b]
+x[quote]

[b]Dave - 4/14/2021[/b]
+x[quote]

[b]LNM - 4/14/2021[/b]
Hi all,
I'm currently working on creating three different Inquisit scripts to determine the best way to collect the data. The three versions are the same, but only vary in the response style. Quick summary of the task: subjects see one word at a time, are then asked to rate this word, followed by a '!' to indicate the next word is coming etc. So: screen1 = word, screen2 = rating, screen 3 =!, screen=4 word, etc.

Here's a part of the script for each version/the elements used:

Version 1: Yes/No
<trial rating>
/ stimulustimes = [1= rating]
/ validresponse = ("j", "n")
/ branch = [trial.word]
</trial>

Version 2: Likert 1 - 5
<likert mylikert>
/anchors = [1="anchor1

"; 5="anchor5

"]
/stimulusframes = [ 1 = likertrating ]
/numpoints=5
/position= (50, 65)
/anchorwidth=120px
/fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.woord]
</likert>

Version 3: Slider 0 - 100
<slidertrial myslider>
/ stimulusframes=[1=sliderrating]
/ defaultresponse = "50"
/ required = true
/ labels=("label1", "label2")
/ range = (0, 100)
/ increment = 1
/ showticks = true
/ position= (50, 65)
/ buttonlabel = "Continue"
/ fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.word*]
</slidertrial>

*trial.word = the "!"

The scripts are working fine, however in version 3 one has to press Continue to proceed, whereas in version 1 and 2 one proceeds automatically after selecting an answer. I need this to be same for all three versions, so either a 'Continue' button for all OR all proceeding automatically after answering.

I've spent quite some time trying different ways, reading the tutorials/this forum, and from what I understand it's not possible to remove the 'Continue' button from version 3/using <slidertrial>. It also does not seem to be possible to add this button to the other 2 versions. Is there another way to do this? Any help would be much appreciated! :)
[/quote]

In version 1 and 2, you can run a trial after the <trial rating> and <likert mylikert> respectively. That trial can display a <button> element and accept that as its response.

https://www.millisecond.com/support/docs/v6/html/language/elements/button.htm
[/quote]

Thanks for your quick reply! Would this button be present on the same screen, like this?:

[/quote]

It's a stimulus, so you can display it via the <trial>'s or <likert>'s stimulusframes in addition to the subsequent trial that actually takes the button response.
[/quote]

Thanks again, I've tried adding the button in the Likert-script and it works. However, one still automatically proceeds once a number on the Likert-scale has been selected (so right now the button is just there for show and not actually doing anything). How do I adjust the script so it does not continue until the button has been pressed as well?

RE: Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

Dave — Wed, 14 Apr 2021 11:57:10 GMT

+x[quote]

[b]LNM - 4/14/2021[/b]
+x[quote]

[b]Dave - 4/14/2021[/b]
+x[quote]

[b]LNM - 4/14/2021[/b]
Hi all,
I'm currently working on creating three different Inquisit scripts to determine the best way to collect the data. The three versions are the same, but only vary in the response style. Quick summary of the task: subjects see one word at a time, are then asked to rate this word, followed by a '!' to indicate the next word is coming etc. So: screen1 = word, screen2 = rating, screen 3 =!, screen=4 word, etc.

Here's a part of the script for each version/the elements used:

Version 1: Yes/No
<trial rating>
/ stimulustimes = [1= rating]
/ validresponse = ("j", "n")
/ branch = [trial.word]
</trial>

Version 2: Likert 1 - 5
<likert mylikert>
/anchors = [1="anchor1

"; 5="anchor5

"]
/stimulusframes = [ 1 = likertrating ]
/numpoints=5
/position= (50, 65)
/anchorwidth=120px
/fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.woord]
</likert>

Version 3: Slider 0 - 100
<slidertrial myslider>
/ stimulusframes=[1=sliderrating]
/ defaultresponse = "50"
/ required = true
/ labels=("label1", "label2")
/ range = (0, 100)
/ increment = 1
/ showticks = true
/ position= (50, 65)
/ buttonlabel = "Continue"
/ fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.word*]
</slidertrial>

*trial.word = the "!"

The scripts are working fine, however in version 3 one has to press Continue to proceed, whereas in version 1 and 2 one proceeds automatically after selecting an answer. I need this to be same for all three versions, so either a 'Continue' button for all OR all proceeding automatically after answering.

I've spent quite some time trying different ways, reading the tutorials/this forum, and from what I understand it's not possible to remove the 'Continue' button from version 3/using <slidertrial>. It also does not seem to be possible to add this button to the other 2 versions. Is there another way to do this? Any help would be much appreciated! :)
[/quote]

In version 1 and 2, you can run a trial after the <trial rating> and <likert mylikert> respectively. That trial can display a <button> element and accept that as its response.

https://www.millisecond.com/support/docs/v6/html/language/elements/button.htm
[/quote]

Thanks for your quick reply! Would this button be present on the same screen, like this?:

[/quote]

It's a stimulus, so you can display it via the <trial>'s or <likert>'s stimulusframes in addition to the subsequent trial that actually takes the button response.

RE: Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

LNM — Wed, 14 Apr 2021 11:48:45 GMT

+x[quote]

[b]Dave - 4/14/2021[/b]
+x[quote]

[b]LNM - 4/14/2021[/b]
Hi all,
I'm currently working on creating three different Inquisit scripts to determine the best way to collect the data. The three versions are the same, but only vary in the response style. Quick summary of the task: subjects see one word at a time, are then asked to rate this word, followed by a '!' to indicate the next word is coming etc. So: screen1 = word, screen2 = rating, screen 3 =!, screen=4 word, etc.

Here's a part of the script for each version/the elements used:

Version 1: Yes/No
<trial rating>
/ stimulustimes = [1= rating]
/ validresponse = ("j", "n")
/ branch = [trial.word]
</trial>

Version 2: Likert 1 - 5
<likert mylikert>
/anchors = [1="anchor1

"; 5="anchor5

"]
/stimulusframes = [ 1 = likertrating ]
/numpoints=5
/position= (50, 65)
/anchorwidth=120px
/fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.woord]
</likert>

Version 3: Slider 0 - 100
<slidertrial myslider>
/ stimulusframes=[1=sliderrating]
/ defaultresponse = "50"
/ required = true
/ labels=("label1", "label2")
/ range = (0, 100)
/ increment = 1
/ showticks = true
/ position= (50, 65)
/ buttonlabel = "Continue"
/ fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.word*]
</slidertrial>

*trial.word = the "!"

The scripts are working fine, however in version 3 one has to press Continue to proceed, whereas in version 1 and 2 one proceeds automatically after selecting an answer. I need this to be same for all three versions, so either a 'Continue' button for all OR all proceeding automatically after answering.

I've spent quite some time trying different ways, reading the tutorials/this forum, and from what I understand it's not possible to remove the 'Continue' button from version 3/using <slidertrial>. It also does not seem to be possible to add this button to the other 2 versions. Is there another way to do this? Any help would be much appreciated! :)
[/quote]

In version 1 and 2, you can run a trial after the <trial rating> and <likert mylikert> respectively. That trial can display a <button> element and accept that as its response.

https://www.millisecond.com/support/docs/v6/html/language/elements/button.htm
[/quote]

Thanks for your quick reply! Would this button be present on the same screen, like this?:

RE: Three different response versions (Yes-no/Likert/slider), all with or without 'Continue' button

Dave — Wed, 14 Apr 2021 11:43:10 GMT

+x[quote]

[b]LNM - 4/14/2021[/b]
Hi all,
I'm currently working on creating three different Inquisit scripts to determine the best way to collect the data. The three versions are the same, but only vary in the response style. Quick summary of the task: subjects see one word at a time, are then asked to rate this word, followed by a '!' to indicate the next word is coming etc. So: screen1 = word, screen2 = rating, screen 3 =!, screen=4 word, etc.

Here's a part of the script for each version/the elements used:

Version 1: Yes/No
<trial rating>
/ stimulustimes = [1= rating]
/ validresponse = ("j", "n")
/ branch = [trial.word]
</trial>

Version 2: Likert 1 - 5
<likert mylikert>
/anchors = [1="anchor1

"; 5="anchor5

"]
/stimulusframes = [ 1 = likertrating ]
/numpoints=5
/position= (50, 65)
/anchorwidth=120px
/fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.woord]
</likert>

Version 3: Slider 0 - 100
<slidertrial myslider>
/ stimulusframes=[1=sliderrating]
/ defaultresponse = "50"
/ required = true
/ labels=("label1", "label2")
/ range = (0, 100)
/ increment = 1
/ showticks = true
/ position= (50, 65)
/ buttonlabel = "Continue"
/ fontstyle = ("Verdana", 2%, true, false, false, false, 5, 0)
/ branch = [trial.word*]
</slidertrial>

*trial.word = the "!"

The scripts are working fine, however in version 3 one has to press Continue to proceed, whereas in version 1 and 2 one proceeds automatically after selecting an answer. I need this to be same for all three versions, so either a 'Continue' button for all OR all proceeding automatically after answering.

I've spent quite some time trying different ways, reading the tutorials/this forum, and from what I understand it's not possible to remove the 'Continue' button from version 3/using <slidertrial>. It also does not seem to be possible to add this button to the other 2 versions. Is there another way to do this? Any help would be much appreciated! :)
[/quote]

In version 1 and 2, you can run a trial after the <trial rating> and <likert mylikert> respectively. That trial can display a <button> element and accept that as its response.

https://www.millisecond.com/support/docs/v6/html/language/elements/button.htm