Millisecond Forums » Millisecond Forums » Inquisit 6 » Amount of Time Someone Must Stay on a Page Before Continuing?

Amount of Time Someone Must Stay on a Page Before Continuing?

dng36 — Thu, 20 Mar 2025 16:02:21 GMT

Hi, I am currently working with pages of text that I would like people to read before continuing (they are part of a dropdown/branch attribute), but I'm concerned they'll move on before really reading through it. I'd love to attach a timer that doesn't allow them to move on until 30 seconds have passed, but I'm having trouble doing that on a page attribute. Right now, I am using the page attribute so that I can include it in a block like this:

<block DollyParton>
/ preinstructions = (DollyParton)
</block>

<page DollyParton>
^(PLACEHOLDER)
</page>

Is there a way to get around this? I've tried using the timeout command in the block, but I don't think it applies to preinstructions. I need to write quite a bit of text, which is why I haven't used trial instead of page, but I'm very open to suggestions. Thank you so much!

RE: Amount of Time Someone Must Stay on a Page Before Continuing?

dng36 — Thu, 20 Mar 2025 16:02:21 GMT

+x[quote]

[b]Dave - 3/20/2025[/b]
+x[quote]

[b]dng36 - 3/20/2025[/b]
+x[quote]

[b]Dave - 3/20/2025[/b]
+x[quote]

[b]dng36 - 3/20/2025[/b]
Hi, I am currently working with pages of text that I would like people to read before continuing (they are part of a dropdown/branch attribute), but I'm concerned they'll move on before really reading through it. I'd love to attach a timer that doesn't allow them to move on until 30 seconds have passed, but I'm having trouble doing that on a page attribute. Right now, I am using the page attribute so that I can include it in a block like this:

<block DollyParton>
/ preinstructions = (DollyParton)
</block>

<page DollyParton>
^(PLACEHOLDER)
</page>

Is there a way to get around this? I've tried using the timeout command in the block, but I don't think it applies to preinstructions. I need to write quite a bit of text, which is why I haven't used trial instead of page, but I'm very open to suggestions. Thank you so much!
[/quote]

For instruction pages (<page>, <htmlPage>), behavior is controlled by the <instruct> element. Here specifically, you need to specify /wait in <instruct> as needed.

https://www.millisecond.com/support/docs/v6/html/language/attributes/wait.htm

[/quote]

Hi Dave, thank you so much, this is very helpful! Do you know of a way to only have an instruct command affect specific pages? I have several pages in the script that do not require the participant to stay on them for that long, it's just these sets of pages that require prolonged attention.
[/quote]

[code]<instruct>
/ wait = values.waittime
</instruct>

<values>
/ waittime = 0
</values>

<page a>
^You can advance immedialely.
</page>

<page b1>
^You need to wait 30 seconds.
</page>

<page b2>
^You need to wait 30 seconds.
</page>

<page c>
^You can advance immedialely.
</page>

<block a>
/ preinstructions = (a)
</block>

<block b>
/ onblockbegin = [
values.waittime = 30000;
]
/ preinstructions = (b1, b2)
</block>

<block c>
/ onblockbegin = [
values.waittime = 0;
]
/ preinstructions = (c)
</block>

<expt myExpt>
/ blocks = [1=a; 2=b; 3=c]
</expt>[/code]
[/quote]

Hi Dave, this is great, thank you so much for your help!!

RE: Amount of Time Someone Must Stay on a Page Before Continuing?

Dave — Thu, 20 Mar 2025 15:07:45 GMT

+x[quote]

[b]dng36 - 3/20/2025[/b]
+x[quote]

[b]Dave - 3/20/2025[/b]
+x[quote]

[b]dng36 - 3/20/2025[/b]
Hi, I am currently working with pages of text that I would like people to read before continuing (they are part of a dropdown/branch attribute), but I'm concerned they'll move on before really reading through it. I'd love to attach a timer that doesn't allow them to move on until 30 seconds have passed, but I'm having trouble doing that on a page attribute. Right now, I am using the page attribute so that I can include it in a block like this:

<block DollyParton>
/ preinstructions = (DollyParton)
</block>

<page DollyParton>
^(PLACEHOLDER)
</page>

Is there a way to get around this? I've tried using the timeout command in the block, but I don't think it applies to preinstructions. I need to write quite a bit of text, which is why I haven't used trial instead of page, but I'm very open to suggestions. Thank you so much!
[/quote]

For instruction pages (<page>, <htmlPage>), behavior is controlled by the <instruct> element. Here specifically, you need to specify /wait in <instruct> as needed.

https://www.millisecond.com/support/docs/v6/html/language/attributes/wait.htm

[/quote]

Hi Dave, thank you so much, this is very helpful! Do you know of a way to only have an instruct command affect specific pages? I have several pages in the script that do not require the participant to stay on them for that long, it's just these sets of pages that require prolonged attention.
[/quote]

[code]<instruct>
/ wait = values.waittime
</instruct>

<values>
/ waittime = 0
</values>

<page a>
^You can advance immedialely.
</page>

<page b1>
^You need to wait 30 seconds.
</page>

<page b2>
^You need to wait 30 seconds.
</page>

<page c>
^You can advance immedialely.
</page>

<block a>
/ preinstructions = (a)
</block>

<block b>
/ onblockbegin = [
values.waittime = 30000;
]
/ preinstructions = (b1, b2)
</block>

<block c>
/ onblockbegin = [
values.waittime = 0;
]
/ preinstructions = (c)
</block>

<expt myExpt>
/ blocks = [1=a; 2=b; 3=c]
</expt>[/code]

RE: Amount of Time Someone Must Stay on a Page Before Continuing?

dng36 — Thu, 20 Mar 2025 14:36:19 GMT

+x[quote]

[b]Dave - 3/20/2025[/b]
+x[quote]

[b]dng36 - 3/20/2025[/b]
Hi, I am currently working with pages of text that I would like people to read before continuing (they are part of a dropdown/branch attribute), but I'm concerned they'll move on before really reading through it. I'd love to attach a timer that doesn't allow them to move on until 30 seconds have passed, but I'm having trouble doing that on a page attribute. Right now, I am using the page attribute so that I can include it in a block like this:

<block DollyParton>
/ preinstructions = (DollyParton)
</block>

<page DollyParton>
^(PLACEHOLDER)
</page>

Is there a way to get around this? I've tried using the timeout command in the block, but I don't think it applies to preinstructions. I need to write quite a bit of text, which is why I haven't used trial instead of page, but I'm very open to suggestions. Thank you so much!
[/quote]

For instruction pages (<page>, <htmlPage>), behavior is controlled by the <instruct> element. Here specifically, you need to specify /wait in <instruct> as needed.

https://www.millisecond.com/support/docs/v6/html/language/attributes/wait.htm

[/quote]

Hi Dave, thank you so much, this is very helpful! Do you know of a way to only have an instruct command affect specific pages? I have several pages in the script that do not require the participant to stay on them for that long, it's just these sets of pages that require prolonged attention.

RE: Amount of Time Someone Must Stay on a Page Before Continuing?

Dave — Thu, 20 Mar 2025 11:30:06 GMT

+x[quote]

[b]dng36 - 3/20/2025[/b]
Hi, I am currently working with pages of text that I would like people to read before continuing (they are part of a dropdown/branch attribute), but I'm concerned they'll move on before really reading through it. I'd love to attach a timer that doesn't allow them to move on until 30 seconds have passed, but I'm having trouble doing that on a page attribute. Right now, I am using the page attribute so that I can include it in a block like this:

<block DollyParton>
/ preinstructions = (DollyParton)
</block>

<page DollyParton>
^(PLACEHOLDER)
</page>

Is there a way to get around this? I've tried using the timeout command in the block, but I don't think it applies to preinstructions. I need to write quite a bit of text, which is why I haven't used trial instead of page, but I'm very open to suggestions. Thank you so much!
[/quote]

For instruction pages (<page>, <htmlPage>), behavior is controlled by the <instruct> element. Here specifically, you need to specify /wait in <instruct> as needed.

https://www.millisecond.com/support/docs/v6/html/language/attributes/wait.htm