InstantForum 2017-1 FinalMillisecond Forumshttps://forums.millisecond.com/Millisecond ForumsThu, 30 Apr 2026 13:23:27 GMT20https://forums.millisecond.com/Topic7894.aspx<p>Thank you!</p>Sun, 22 Apr 2012 14:24:47 GMTsianehtahttps://forums.millisecond.com/Topic7893.aspx<p>You'll want to set /playthrough = true on the &lt;video&gt;, set the &lt;trial&gt;'s /timeout to length of video + 2400* and its /responsetime to 0.</p> <p>Regards,</p> <p>~Dave</p> <p>* You'll have to work this out for every single video</p>Sun, 22 Apr 2012 14:00:33 GMTDavehttps://forums.millisecond.com/Topic7892.aspx<p>I am running an experiment, in which I present videos of varying length. Each video is a separate trial and I need to control the response time out after each one. Participants however need to be able to respond even during the stimulus presentation. Basically, I need the program to play the video stimulus till the end&nbsp;(which will be different for different videos)&nbsp;and then give additional 2400 ms for a response. This is what I was using but it does not provide the correct results. Any ideas how to fix it?</p> <p> <p>&lt;trial A_video&gt;</p> <p>/correctresponse = (lbuttondown)</p> <p>/inputdevice = mousekey</p> <p>/response = timeout(2400)</p> <p>/responseinterrupt = trial</p> <p>/stimulustimes = [0 =A_video, A_trigger; 150 = neutral_trigger]</p> <p>/validresponse = (rbuttondown, lbuttondown)</p> <p>/responsemessage = (lbuttondown, CorTrig,5)</p> <p>/responsemessage = (rbuttondown, IncTrig,5)</p> </p>Sun, 22 Apr 2012 13:29:53 GMTsianehta