Stop Signal Task- Is the pracblock included in SSRT estimation?


Author
Message
SanWin
SanWin
New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)
Group: Forum Members
Posts: 2, Visits: 5
I wonder if the Pracbloc is included in the global SSRT estimation, because I want to create an additional Pracblock without a stop signal, as shown below. Is it possible to do it this way, or could this skew my data?
Thank you very much.

   Practice 1 (1 Block of 16 Trials)
***********************************************************************************************************************************************************************
<block pracblock1>
/ onblockbegin = [values.trialnumber=0; values.blocknumber="Übung1"; values.countdown=values.waitbetweenblocks]
/ onblockend = [values.blocknumber=0; values.ssd=0; values.ssd_sum=0; values.ns_rtcorrsum=0; values.sr_rtsum=0;
    values.sr_ntotal=0; values.ns_nmiss=0; values.ns_ncorr=0; values.ns_ntotal=0; values.ss_ncorr=0; values.ss_ntotal=0;
    values.raw_rtsum=0; values.ns_nnoresp=0; values.ns_rtsum=0; values.ns_nresp=0]
/ onblockend = [if(values.resetpracticessd==true)values.ssd_next=values.ssd_start]
/ trials = [1=InstruktionTest; 2= Instruktion1; 3=Training; 4-19=noreplace(nstrial)]
/ recorddata = true
</block>

***********************************************************************************************************************************************************************
    Practice 2 (1 Block of 16 Trials)
***********************************************************************************************************************************************************************
<block pracblock2>
/ onblockbegin = [values.trialnumber=0; values.blocknumber="Übung2"; values.countdown=values.waitbetweenblocks]
/ onblockend = [values.blocknumber=0; values.ssd=0; values.ssd_sum=0; values.ns_rtcorrsum=0; values.sr_rtsum=0;
    values.sr_ntotal=0; values.ns_nmiss=0; values.ns_ncorr=0; values.ns_ntotal=0; values.ss_ncorr=0; values.ss_ntotal=0;
    values.raw_rtsum=0; values.ns_nnoresp=0; values.ns_rtsum=0; values.ns_nresp=0]
/ onblockend = [if(values.resetpracticessd==true)values.ssd_next=values.ssd_start]
/ trials = [1=Training2; 2-17=noreplace(nstrial,nstrial,nstrial,sstrial); 18= blocksummary; 19=Instruktion2]
/ recorddata = true
</block>
Dave
Dave
Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)Supreme Being (1M reputation)
Group: Administrators
Posts: 13K, Visits: 102K
SanWin - 5/15/2023
I wonder if the Pracbloc is included in the global SSRT estimation, because I want to create an additional Pracblock without a stop signal, as shown below. Is it possible to do it this way, or could this skew my data?
Thank you very much.

   Practice 1 (1 Block of 16 Trials)
***********************************************************************************************************************************************************************
<block pracblock1>
/ onblockbegin = [values.trialnumber=0; values.blocknumber="Übung1"; values.countdown=values.waitbetweenblocks]
/ onblockend = [values.blocknumber=0; values.ssd=0; values.ssd_sum=0; values.ns_rtcorrsum=0; values.sr_rtsum=0;
    values.sr_ntotal=0; values.ns_nmiss=0; values.ns_ncorr=0; values.ns_ntotal=0; values.ss_ncorr=0; values.ss_ntotal=0;
    values.raw_rtsum=0; values.ns_nnoresp=0; values.ns_rtsum=0; values.ns_nresp=0]
/ onblockend = [if(values.resetpracticessd==true)values.ssd_next=values.ssd_start]
/ trials = [1=InstruktionTest; 2= Instruktion1; 3=Training; 4-19=noreplace(nstrial)]
/ recorddata = true
</block>

***********************************************************************************************************************************************************************
    Practice 2 (1 Block of 16 Trials)
***********************************************************************************************************************************************************************
<block pracblock2>
/ onblockbegin = [values.trialnumber=0; values.blocknumber="Übung2"; values.countdown=values.waitbetweenblocks]
/ onblockend = [values.blocknumber=0; values.ssd=0; values.ssd_sum=0; values.ns_rtcorrsum=0; values.sr_rtsum=0;
    values.sr_ntotal=0; values.ns_nmiss=0; values.ns_ncorr=0; values.ns_ntotal=0; values.ss_ncorr=0; values.ss_ntotal=0;
    values.raw_rtsum=0; values.ns_nnoresp=0; values.ns_rtsum=0; values.ns_nresp=0]
/ onblockend = [if(values.resetpracticessd==true)values.ssd_next=values.ssd_start]
/ trials = [1=Training2; 2-17=noreplace(nstrial,nstrial,nstrial,sstrial); 18= blocksummary; 19=Instruktion2]
/ recorddata = true
</block>

> I wonder if the Pracbloc is included in the global SSRT estimation.

No, practice trials are not included. There is an asterisk, however. In the original Verbruggen et al. implementation, SSD is not reset to its starting value after practice, i.e. the test block proceeds starting from whatever the SSD was at the end of practice. If you don't want this, the script explicitly contains a switch to reset the SSD after practice, and this is explained in the user manual.

SanWin
SanWin
New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)New Member (23 reputation)
Group: Forum Members
Posts: 2, Visits: 5
Dave - 5/15/2023
SanWin - 5/15/2023
I wonder if the Pracbloc is included in the global SSRT estimation, because I want to create an additional Pracblock without a stop signal, as shown below. Is it possible to do it this way, or could this skew my data?
Thank you very much.

   Practice 1 (1 Block of 16 Trials)
***********************************************************************************************************************************************************************
<block pracblock1>
/ onblockbegin = [values.trialnumber=0; values.blocknumber="Übung1"; values.countdown=values.waitbetweenblocks]
/ onblockend = [values.blocknumber=0; values.ssd=0; values.ssd_sum=0; values.ns_rtcorrsum=0; values.sr_rtsum=0;
    values.sr_ntotal=0; values.ns_nmiss=0; values.ns_ncorr=0; values.ns_ntotal=0; values.ss_ncorr=0; values.ss_ntotal=0;
    values.raw_rtsum=0; values.ns_nnoresp=0; values.ns_rtsum=0; values.ns_nresp=0]
/ onblockend = [if(values.resetpracticessd==true)values.ssd_next=values.ssd_start]
/ trials = [1=InstruktionTest; 2= Instruktion1; 3=Training; 4-19=noreplace(nstrial)]
/ recorddata = true
</block>

***********************************************************************************************************************************************************************
    Practice 2 (1 Block of 16 Trials)
***********************************************************************************************************************************************************************
<block pracblock2>
/ onblockbegin = [values.trialnumber=0; values.blocknumber="Übung2"; values.countdown=values.waitbetweenblocks]
/ onblockend = [values.blocknumber=0; values.ssd=0; values.ssd_sum=0; values.ns_rtcorrsum=0; values.sr_rtsum=0;
    values.sr_ntotal=0; values.ns_nmiss=0; values.ns_ncorr=0; values.ns_ntotal=0; values.ss_ncorr=0; values.ss_ntotal=0;
    values.raw_rtsum=0; values.ns_nnoresp=0; values.ns_rtsum=0; values.ns_nresp=0]
/ onblockend = [if(values.resetpracticessd==true)values.ssd_next=values.ssd_start]
/ trials = [1=Training2; 2-17=noreplace(nstrial,nstrial,nstrial,sstrial); 18= blocksummary; 19=Instruktion2]
/ recorddata = true
</block>

> I wonder if the Pracbloc is included in the global SSRT estimation.

No, practice trials are not included. There is an asterisk, however. In the original Verbruggen et al. implementation, SSD is not reset to its starting value after practice, i.e. the test block proceeds starting from whatever the SSD was at the end of practice. If you don't want this, the script explicitly contains a switch to reset the SSD after practice, and this is explained in the user manual.

Thank you very much for this quick reply. I just wanted to make sure because of the extra practice block. Thanks for the additional advice with the SSD, but I do not want to change this.

GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...




Reading This Topic

Explore
Messages
Mentions
Search