<values>
/fixationduration = 500
/probeduration = 1000
/fixation_posttrialpause = 0
/target_posttrialpause = 0
/probe1 = "A"
/probe2 = "H"
/responsekey_left = 30
/responsekey_right = 35
/responsekey_left_label = "A"
/responsekey_right_label = "H"
/minimum_latency = 1000
/target_left_x = 27%
/target_right_x = 73%
/target_y = 50%
/target_x = 50%
/target_bottom_y = 27%
/target_top_y = 73%
/fixationcross_height = 5%
/probe_height = 5%
/imagewidth = 40%
/imageheight = 40%
</values>
<expressions>
/targetduration = rand(30,750)
/probe_posttrialpause = rand(250,750)
</expressions>
*******************************************************
********************************************
Editable Instructions
********************************************
*******************************************************
<instruct>
/ fontstyle = ("Arial", 3.00%, false, false, false, false, 5, 1)
/ txcolor = (0, 0, 0)
/windowsize = (90%, 90%)
/ finishlabel = "Press <Spacebar> to continue"
/ nextkey = (57)
/nextlabel = "Press <Spacebar> to continue"
/prevkey = (28)
/prevlabel = "Press <Enter> to go back"
</instruct>
<page practice>
Practice is over.
^^^^When you are ready, continue on to the actual task. The actual task is like practice but there is not going to be any feedback.
^^^^^^^^^^^^^Please press the spacebar key to begin.
</page>
<page thankyou>
Thank you for your participation!
</page>
*******************************************************
********************************************
Editable Stimuli: original stimuli generously shared by Dr. Fillmore
********************************************
*******************************************************
Note:
itemnumbers 1-10: simple pictures
Note: itemnumbers 11-20 could contain complex pictures (itemnumbers > 10
would then always distinguish between simple and complex pictures)
<item highimages>
/1 = "high1.bmp"
/2 = "high6.bmp"
/3 = "high10.bmp"
/4 = "high16.bmp"
/5 = "high17.bmp"
/6 = "high18.bmp"
/7 = "high19.bmp"
/8 = "high21.bmp"
/9 = "high22.bmp"
/10 = "high23.bmp"
/11 = "high25.bmp"
/12 = "high27.bmp"
/13 = "high28.bmp"
/14 = "high29.bmp"
/15 = "high34.bmp"
/16 = "high35.bmp"
/17 = "high38.bmp"
/18 = "high39.bmp"
/19 = "high40.bmp"
/20 = "high41.bmp"
/21 = "high42.bmp"
/22 = "high44.bmp"
/23 = "high47.bmp"
/24 = "high48.bmp"
</item>
<item lowimages>
/1 = "low1.bmp"
/2 = "low6.bmp"
/3 = "low10.bmp"
/4 = "low16.bmp"
/5 = "low17.bmp"
/6 = "low18.bmp"
/7 = "low19.bmp"
/8 = "low21.bmp"
/9 = "low22.bmp"
/10 = "low23.bmp"
/11 = "low25.bmp"
/12 = "low27.bmp"
/13 = "low28.bmp"
/14 = "low29.bmp"
/15 = "low34.bmp"
/16 = "low35.bmp"
/17 = "low38.bmp"
/18 = "low39.bmp"
/19 = "low40.bmp"
/20 = "low41.bmp"
/21 = "low42.bmp"
/22 = "low44.bmp"
/23 = "low47.bmp"
/24 = "low48.bmp"
</item>
<item fillerimages_high>
/1 = "high1.bmp"
/2 = "high6.bmp"
/3 = "high10.bmp"
/4 = "high16.bmp"
/5 = "high17.bmp"
/6 = "high18.bmp"
/7 = "high19.bmp"
/8 = "high21.bmp"
/9 = "high22.bmp"
/10 = "high23.bmp"
/11 = "high25.bmp"
/12 = "high27.bmp"
/13 = "high28.bmp"
/14 = "high29.bmp"
/15 = "high34.bmp"
/16 = "high35.bmp"
/17 = "high38.bmp"
/18 = "high39.bmp"
/19 = "high40.bmp"
/20 = "high41.bmp"
/21 = "high42.bmp"
/22 = "high44.bmp"
/23 = "high47.bmp"
/24 = "high48.bmp"
</item>
<item fillerimages_low>
/1 = "low1.bmp"
/2 = "low6.bmp"
/3 = "low10.bmp"
/4 = "low16.bmp"
/5 = "low17.bmp"
/6 = "low18.bmp"
/7 = "low19.bmp"
/8 = "low21.bmp"
/9 = "low22.bmp"
/10 = "low23.bmp"
/11 = "low25.bmp"
/12 = "low27.bmp"
/13 = "low28.bmp"
/14 = "low29.bmp"
/15 = "low34.bmp"
/16 = "low35.bmp"
/17 = "low38.bmp"
/18 = "low39.bmp"
/19 = "low40.bmp"
/20 = "low41.bmp"
/21 = "low42.bmp"
/22 = "low44.bmp"
/23 = "low47.bmp"
/24 = "low48.bmp"
</item>
*******************************************************************************************************************
*******************************************************************************************************************
DEFAULTS
*******************************************************************************************************************
*******************************************************************************************************************
requires Inquisit 4.0.3.0 or higher
<defaults>
/minimumversion = "4.0.3.0"
/ fontstyle = ("Arial", 3%, false, false, false, false, 5, 1)
/ txcolor = (white)
/txbgcolor = (black)
/screencolor = black
/canvasaspectratio = (4,3)
</defaults>
*******************************************************************************************************************
*******************************************************************************************************************
VALUES
*******************************************************************************************************************
*******************************************************************************************************************
********************
automatically updated
********************
/itemnumber: itemnumber of currently selected picture
/selecteditem: helper variable to determine itemnumber
/high_x-probe_x: the y-coordinate (in %) of the high/low/probe
/lowimage: stores the currently presented low image (or pseudo low image)
/highimage: stores the currently presented high image (or pseudo high image)
/highposition: 1 = high image on right; 2 = high image on left
/congruence: 0 = filler; 1 = probe and high position same; 2 = probe and high position different
Summary Variables: only for high and low pictures (not for filler1/filler2 pictures = filler stimuli)
/sum_correct: counts the correct responses >= values.minimum_latency (here: 100ms)
/sum_correct_probeinhighposition_simple: counts the correct responses to probes in the high position/probes in the low position
/sum_correct_probeinlowposition_simple: for responses >= values.minimum_latency (simple pictures)
/sum_correct_probeinhighposition_complex: counts the correct responses to probes in the high position/probes in the low position
/sum_correct_probeinlowposition_complex: for responses >= values.minimum_latency (complex pictures)
/sumrt_probeinhighposition_simple: adds up the latencies for CORRECT responses when the probe is in the high/low position
/sumrt_probeinlowposition_simple: and latencies >= values.minimum_latency (simple pictures)
/sumrt_probeinhighposition_complex: adds up the latencies for CORRECT responses when the probe is in the high/low position
/sumrt_probeinlowposition_complex: and latencies >= values.minimum_latency (complex pictures)
/meanrt_probeinhighposition_simple: contains the mean latency for CORRECT responses when the probe is in the high/low position
/meanrt_probeinlowposition_simple: (simple pictures)
/meanrt_probeinhighposition_complex: contains the mean latency for CORRECT responses when the probe is in the high/low position
/meanrt_probeinlowposition_complex: (complex pictures)
/task: 1 = practice; 2 = test
<values>
/itemnumber = 0
/selecteditem = ""
/high_x = 0
/high_y = 0
/low_x = 0
/low_y = 0
/probe_x = 0
/probe_y = 0
/probetype = 0
/lowimage = ""
/lowimage_y = ""
/highimage = ""
/highimage_y = ""
/highposition = 0
/congruence = 0
/sum_correct = 0
/sum_correct_probeinhighposition_simple = 0
/sum_correct_probeinlowposition_simple= 0
/sumrt_probeinhighposition_simple = 0
/sumrt_probeinlowposition_simple = 0
/meanrt_probeinhighposition_simple = 0
/meanrt_probeinlowposition_simple = 0
/task = 0
</values>
*******************************************************************************************************************
*******************************************************************************************************************
EXPRESSIONS
*******************************************************************************************************************
*******************************************************************************************************************
/AB_simple: Attentional Bias for simple pictures: If AB_simple > 0 => faster mean latencies to high pictures for simple pictures
<expressions>
/AB_simple = values.meanrt_probeinlowposition_simple - values.meanrt_probeinhighposition_simple
</expressions>
*******************************************************************************************************************
*******************************************************************************************************************
DATA
*******************************************************************************************************************
*******************************************************************************************************************
for explanations of custom values, go to VALUES/EXPRESSIONS. Customize.
********************
raw data
********************
<data>
/file = "highDotProbe_rawdata.iqdat"
/separatefiles = true
/columns = [date, time, subject, blockcode, blocknum, trialcode, trialnum,
values.congruence, values.highposition,
values.low_x, values.high_x, values.high_y, values.probe_x, values.probe_y
values.itemnumber, values.highimage, values.lowimage, values.highimage_y, values.lowimage_y
response, correct, latency, values.sum_correct
values.meanrt_probeinhighposition_simple, values.sumrt_probeinhighposition_simple, values.sum_correct_probeinhighposition_simple,
values.meanrt_probeinlowposition_simple, values.sumrt_probeinlowposition_simple, values.sum_correct_probeinlowposition_simple,
expressions.ab_simple]
</data>
********************
summary data
********************
<summarydata >
/file = "highDotProbe_summary.iqdat"
/columns = [script.startdate, script.starttime, script.subjectid,
values.fixationduration, expressions.targetduration, values.probeduration,
values.fixation_posttrialpause, values.target_posttrialpause, expressions.probe_posttrialpause,
values.probe1, values.probe2,
values.sum_correct,
values.meanrt_probeinhighposition_simple, values.sumrt_probeinhighposition_simple, values.sum_correct_probeinhighposition_simple,
values.meanrt_probeinlowposition_simple, values.sumrt_probeinlowposition_simple, values.sum_correct_probeinlowposition_simple,
expressions.ab_simple]
</summarydata>
*******************************************************************************************************************
*******************************************************************************************************************
STIMULI
*******************************************************************************************************************
*******************************************************************************************************************
<picture highimage>
/items = highimages
/select = values.itemnumber
/hposition = values.high_x
/vposition = values.target_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture highimage_y>
/items = highimages
/select = values.itemnumber
/hposition = values.target_x
/vposition = values.high_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture lowimage>
/items = lowimages
/select = values.itemnumber
/hposition = values.low_x
/vposition = values.target_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture lowimage_y>
/items = lowimages
/select = values.itemnumber
/hposition = values.target_x
/vposition = values.low_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture fillerhighimage>
/items = fillerimages_high
/select = values.itemnumber
/hposition = values.high_x
/vposition = values.target_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture fillerhighimage_y>
/items = fillerimages_high
/select = values.itemnumber
/hposition = values.target_x
/vposition = values.high_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture fillerlowimage>
/items = fillerimages_low
/select = values.itemnumber
/hposition = values.low_x
/vposition = values.target_y
/size = (values.imagewidth, values.imageheight)
</picture>
<picture fillerlowimage_y>
/items = fillerimages_low
/select = values.itemnumber
/hposition = values.target_x
/vposition = values.low_y
/size = (values.imagewidth, values.imageheight)
</picture>
******************************
other stimuli
******************************
<text fixation>
/items = ("+")
/position = (50%, 50%)
/ fontstyle = ("Arial", values.fixationcross_height, false, false, false, false, 5, 1)
</text>
<text probe>
/items = ("<%values.probe1%>", "<%values.probe2%>")
/select = values.probetype
/hposition = values.probe_x
/vposition = values.probe_y
/txcolor = white
/ fontstyle = ("Arial", values.probe_height, false, false, false, false, 5, 1)
</text>
<text break1>
/items = ("Please take a break. The trial will resume in 30 seconds")
/position = (50%, 50%)
/ fontstyle = ("Arial", values.fixationcross_height, false, false, false, false, 5, 1)
</text>
<text break2>
/items = ("Please get ready. The trial will begin in 5 seconds")
/position = (50%, 50%)
/ fontstyle = ("Arial", values.fixationcross_height, false, false, false, false, 5, 1)
</text>
<shape eraser>
/shape = rectangle
/size = (100%, 100%)
/color = black
/position = (50%, 50%)
</shape>
<text feedback>
/items = ("ERROR")
/txcolor = red
/position = (50%, 50%)
/ fontstyle = ("Arial", 10%, true, false, false, false, 5, 1)
</text>
*******************************************************************************************************************
*******************************************************************************************************************
LISTS
*******************************************************************************************************************
*******************************************************************************************************************
Note: the following lists filler the picture selection for the four different trial sequences
(experiment: probe in high/low position; filler: probe in 'high'/'low' position)
to ensure that each image is presented 4 times (right/left, with probe/without probe)
digits: refer to itemnumber
letter: A-> show 'high' picture on the right; B -> show 'high' picture on the left
<list HLH_items>
/items = ("1A", "1B", "2A", "2B","3A", "3B", "4A", "4B", "5A", "5B", "6A", "6B", "7A", "7B", "8A", "8B", "9A", "9B", "10A", "10B", "11A", "11B", "12A", "12B", "13A", "13B", "14A", "14B", "15A", "16A", "16B", "17A", "17B", "18A", "18B", "19A", "19B", "20A", "20B", "21A", "21B", "22A", "22B", "23A", "23B", "24A", "24B")
/replace = false
/resetinterval = 1
</list>
<list HLL_items>
/items = ("1A", "1B", "2A", "2B","3A", "3B", "4A", "4B", "5A", "5B", "6A", "6B", "7A", "7B", "8A", "8B", "9A", "9B", "10A", "10B", "11A", "11B", "12A", "12B", "13A", "13B", "14A", "14B", "15A", "16A", "16B", "17A", "17B", "18A", "18B", "19A", "19B", "20A", "20B", "21A", "21B", "22A", "22B", "23A", "23B", "24A", "24B")
/replace = false
/resetinterval = 1
</list>
<list filler_HHH_items>
/items = ("1A", "1B", "2A", "2B","3A", "3B", "4A", "4B", "5A", "5B", "6A", "6B", "7A", "7B", "8A", "8B", "9A", "9B", "10A", "10B", "11A", "11B", "12A", "12B", "13A", "13B", "14A", "14B", "15A", "16A", "16B", "17A", "17B", "18A", "18B", "19A", "19B", "20A", "20B", "21A", "21B", "22A", "22B", "23A", "23B", "24A", "24B")
/replace = false
/resetinterval = 1
</list>
<list filler_LLL_items>
/items = ("1A", "1B", "2A", "2B","3A", "3B", "4A", "4B", "5A", "5B", "6A", "6B", "7A", "7B", "8A", "8B", "9A", "9B", "10A", "10B", "11A", "11B", "12A", "12B", "13A", "13B", "14A", "14B", "15A", "16A", "16B", "17A", "17B", "18A", "18B", "19A", "19B", "20A", "20B", "21A", "21B", "22A", "22B", "23A", "23B", "24A", "24B")
/replace = false
/resetinterval = 1
</list>
<list probetype>
/items = (1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2)
/replace = false
</list>
*******************************************************************************************************************
*******************************************************************************************************************
EXPERIMENTAL TRIALS: pairs of high images - low images
*******************************************************************************************************************
*******************************************************************************************************************
********************************************
Probe in high Position (HLH) : Trial Sequence
********************************************
Note: trial.fixation_HLH
1) presents the fixation stimulus in the center of the screen
2) calls trial.targets_HLH
3) does not record any data (by default)
<trial fixation_HLH>
/ontrialbegin = [values.congruence = 1]
/stimulusframes = [1 = eraser, fixation]
/timeout = values.fixationduration
/branch = [trial.targets_HLH]
/posttrialpause = values.fixation_posttrialpause
/recorddata = false
</trial>
Note: trial.targets_HLH
1) determines the itemnumber of the current image and whether to show it right or left
2) presents the two images for a set amount of time (values.targetduration)
3) calls trial.probe_HLH
4) does not record any data (by default)
<trial targets_HLH>
/ontrialbegin = [values.selecteditem = list.HLH_items.nextvalue]
/ontrialbegin = [if (values.selecteditem == "1A") {values.itemnumber = 1; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "1B") {values.itemnumber = 1; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "2A") {values.itemnumber = 2; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "2B") {values.itemnumber = 2; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "3A") {values.itemnumber = 3; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "3B") {values.itemnumber = 3; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "4A") {values.itemnumber = 4; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "4B") {values.itemnumber = 4; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "5A") {values.itemnumber = 5; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "5B") {values.itemnumber = 5; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "6A") {values.itemnumber = 6; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "6B") {values.itemnumber = 6; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "7A") {values.itemnumber = 7; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "7B") {values.itemnumber = 7; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "8A") {values.itemnumber = 8; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "8B") {values.itemnumber = 8; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "9A") {values.itemnumber = 9; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "9B") {values.itemnumber = 9; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "10A") {values.itemnumber = 10; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "10B") {values.itemnumber = 10; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "11A") {values.itemnumber = 11; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "11B") {values.itemnumber = 11; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "12A") {values.itemnumber = 12; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "12B") {values.itemnumber = 12; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "13A") {values.itemnumber = 13; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "13B") {values.itemnumber = 13; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "14A") {values.itemnumber = 14; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "14B") {values.itemnumber = 14; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "15A") {values.itemnumber = 15; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "15B") {values.itemnumber = 15; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "16A") {values.itemnumber = 16; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "16B") {values.itemnumber = 16; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "17A") {values.itemnumber = 17; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "17B") {values.itemnumber = 17; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "18A") {values.itemnumber = 18; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "18B") {values.itemnumber = 18; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "19A") {values.itemnumber = 19; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "19B") {values.itemnumber = 19; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "20A") {values.itemnumber = 20; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "20B") {values.itemnumber = 20; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "21A") {values.itemnumber = 21; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "21B") {values.itemnumber = 21; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "22A") {values.itemnumber = 22; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "22B") {values.itemnumber = 22; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "23A") {values.itemnumber = 23; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "23B") {values.itemnumber = 23; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "24A") {values.itemnumber = 24; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "24B") {values.itemnumber = 24; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/stimulusframes = [1 = highimage, lowimage]
/ontrialend = [values.highimage = picture.highimage.currentitem; values.lowimage = picture.lowimage.currentitem]
/timeout = expressions.targetduration
/posttrialpause = values.target_posttrialpause
/branch = [trial.probe_HLH]
/recorddata = false
</trial>
Note: trial.probe_HLH
1. the position of the current probe
2. presents the probe in the high position for max. 1000ms (after that a new trialsequence is started)
3. updates several measures
4. records the relevant data into the data file
<trial probe_HLH>
/ontrialbegin = [values.probetype = list.probetype.nextvalue]
/ontrialbegin = [values.probe_x = values.high_x]
/ontrialbegin = [values.probe_y = values.target_y]
/stimulusframes = [1 = probe]
/isvalidresponse = [trial.probe_HLH.response == values.responsekey_left || trial.probe_HLH.response == values.responsekey_right]
/monkeyresponse = (30, 35)
/iscorrectresponse = [(values.probetype == 1 && trial.probe_HLH.response == values.responsekey_left) ||
(values.probetype == 2 && trial.probe_HLH.response == values.responsekey_right) ]
/ontrialend = [if (trial.probe_HLH.correct && trial.probe_HLH.latency >= values.minimum_latency) {
values.sum_correct += 1;
values.sum_correct_probeinhighposition_simple += 1;
values.sumrt_probeinhighposition_simple += trial.probe_HLH.latency;
values.meanrt_probeinhighposition_simple = values.sumrt_probeinhighposition_simple/values.sum_correct_probeinhighposition_simple}]
/timeout = (values.probeduration)
/branch = [if (values.task == 1 && trial.probe_HLH.error) trial.feedback else trial.intertrialinterval]
</trial>
****************************************************BOT/TOP
Note: trial.fixation_HLH
1) presents the fixation stimulus in the center of the screen
2) calls trial.targets_HLH
3) does not record any data (by default)
<trial fixation_HLH_y>
/ontrialbegin = [values.congruence = 1]
/stimulusframes = [1 = eraser, fixation]
/timeout = values.fixationduration
/branch = [trial.targets_HLH_y]
/posttrialpause = values.fixation_posttrialpause
/recorddata = false
</trial>
Note: trial.targets_HLH
1) determines the itemnumber of the current image and whether to show it right or left
2) presents the two images for a set amount of time (values.targetduration)
3) calls trial.probe_HLH
4) does not record any data (by default)
<trial targets_HLH_y>
/ontrialbegin = [values.selecteditem = list.HLH_items.nextvalue]
/ontrialbegin = [if (values.selecteditem == "1A") {values.itemnumber = 1; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "1B") {values.itemnumber = 1; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "2A") {values.itemnumber = 2; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "2B") {values.itemnumber = 2; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "3A") {values.itemnumber = 3; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "3B") {values.itemnumber = 3; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "4A") {values.itemnumber = 4; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "4B") {values.itemnumber = 4; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "5A") {values.itemnumber = 5; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "5B") {values.itemnumber = 5; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "6A") {values.itemnumber = 6; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "6B") {values.itemnumber = 6; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "7A") {values.itemnumber = 7; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "7B") {values.itemnumber = 7; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "8A") {values.itemnumber = 8; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "8B") {values.itemnumber = 8; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "9A") {values.itemnumber = 9; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "9B") {values.itemnumber = 9; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "10A") {values.itemnumber = 10; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "10B") {values.itemnumber = 10; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "11A") {values.itemnumber = 11; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "11B") {values.itemnumber = 11; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "12A") {values.itemnumber = 12; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "12B") {values.itemnumber = 12; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "13A") {values.itemnumber = 13; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "13B") {values.itemnumber = 13; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "14A") {values.itemnumber = 14; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "14B") {values.itemnumber = 14; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "15A") {values.itemnumber = 15; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "15B") {values.itemnumber = 15; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "16A") {values.itemnumber = 16; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "16B") {values.itemnumber = 16; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "17A") {values.itemnumber = 17; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "17B") {values.itemnumber = 17; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "18A") {values.itemnumber = 18; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "18B") {values.itemnumber = 18; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "19A") {values.itemnumber = 19; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "19B") {values.itemnumber = 19; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "20A") {values.itemnumber = 20; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "20B") {values.itemnumber = 20; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "21A") {values.itemnumber = 21; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "21B") {values.itemnumber = 21; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "22A") {values.itemnumber = 22; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "22B") {values.itemnumber = 22; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "23A") {values.itemnumber = 23; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "23B") {values.itemnumber = 23; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "24A") {values.itemnumber = 24; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "24B") {values.itemnumber = 24; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/stimulusframes = [1 = highimage_y, lowimage_y]
/ontrialend = [values.highimage_y = picture.highimage_y.currentitem; values.lowimage_y = picture.lowimage_y.currentitem]
/timeout = expressions.targetduration
/posttrialpause = values.target_posttrialpause
/branch = [trial.probe_HLH_y]
/recorddata = false
</trial>
Note: trial.probe_HLH
1. the position of the current probe
2. presents the probe in the high position for max. 1000ms (after that a new trialsequence is started)
3. updates several measures
4. records the relevant data into the data file
<trial probe_HLH_y>
/ontrialbegin = [values.probetype = list.probetype.nextvalue]
/ontrialbegin = [values.probe_x= values.target_x]
/ontrialbegin = [values.probe_y = values.high_y]
/stimulusframes = [1 = probe]
/isvalidresponse = [trial.probe_HLH_y.response == values.responsekey_left || trial.probe_HLH_y.response == values.responsekey_right]
/monkeyresponse = (30, 35)
/iscorrectresponse = [(values.probetype == 1 && trial.probe_HLH_y.response == values.responsekey_left) ||
(values.probetype == 2 && trial.probe_HLH_y.response == values.responsekey_right) ]
/ontrialend = [if (trial.probe_HLH_y.correct && trial.probe_HLH_y.latency >= values.minimum_latency) {
values.sum_correct += 1;
values.sum_correct_probeinhighposition_simple += 1;
values.sumrt_probeinhighposition_simple += trial.probe_HLH_y.latency;
values.meanrt_probeinhighposition_simple = values.sumrt_probeinhighposition_simple/values.sum_correct_probeinhighposition_simple}]
/timeout = (values.probeduration)
/branch = [if (values.task == 1 && trial.probe_HLH_y.error) trial.feedback else trial.intertrialinterval]
</trial>
********************************************
Probe in low Position (HLL) : Trial Sequence
********************************************
Note: trial.fixation_HLL
1) presents the fixation stimulus in the center of the screen
2) calls trial.targets_HLL
3) does not record any data (by default)
<trial fixation_HLL>
/ontrialbegin = [values.congruence = 2]
/stimulusframes = [1 = eraser, fixation]
/timeout = values.fixationduration
/branch = [trial.targets_HLL]
/posttrialpause = values.fixation_posttrialpause
/recorddata = false
</trial>
Note: trial.targets_HLL
1) determines the itemnumber of the current image and whether to show it right or left
2) presents the two images for a set amount of time (values.targetduration)
3) calls trial.probe_HLL
4) does not record any data (by default)
<trial targets_HLL>
/ontrialbegin = [values.selecteditem = list.HLL_items.nextvalue]
/ontrialbegin = [if (values.selecteditem == "1A") {values.itemnumber = 1; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "1B") {values.itemnumber = 1; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "2A") {values.itemnumber = 2; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "2B") {values.itemnumber = 2; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "3A") {values.itemnumber = 3; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "3B") {values.itemnumber = 3; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "4A") {values.itemnumber = 4; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "4B") {values.itemnumber = 4; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "5A") {values.itemnumber = 5; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "5B") {values.itemnumber = 5; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "6A") {values.itemnumber = 6; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "6B") {values.itemnumber = 6; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "7A") {values.itemnumber = 7; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "7B") {values.itemnumber = 7; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "8A") {values.itemnumber = 8; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "8B") {values.itemnumber = 8; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "9A") {values.itemnumber = 9; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "9B") {values.itemnumber = 9; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "10A") {values.itemnumber = 10; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "10B") {values.itemnumber = 10; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "11A") {values.itemnumber = 11; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "11B") {values.itemnumber = 11; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "12A") {values.itemnumber = 12; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "12B") {values.itemnumber = 12; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "13A") {values.itemnumber = 13; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "13B") {values.itemnumber = 13; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "14A") {values.itemnumber = 14; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "14B") {values.itemnumber = 14; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "15A") {values.itemnumber = 15; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "15B") {values.itemnumber = 15; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "16A") {values.itemnumber = 16; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "16B") {values.itemnumber = 16; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "17A") {values.itemnumber = 17; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "17B") {values.itemnumber = 17; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "18A") {values.itemnumber = 18; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "18B") {values.itemnumber = 18; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "19A") {values.itemnumber = 19; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "19B") {values.itemnumber = 19; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "20A") {values.itemnumber = 20; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "20B") {values.itemnumber = 20; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "21A") {values.itemnumber = 21; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "21B") {values.itemnumber = 21; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "22A") {values.itemnumber = 22; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "22B") {values.itemnumber = 22; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "23A") {values.itemnumber = 23; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "23B") {values.itemnumber = 23; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "24A") {values.itemnumber = 24; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "24B") {values.itemnumber = 24; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/stimulusframes = [1 = highimage, lowimage]
/ontrialend = [values.highimage = picture.highimage.currentitem; values.lowimage = picture.lowimage.currentitem]
/timeout = expressions.targetduration
/posttrialpause = values.target_posttrialpause
/branch = [trial.probe_HLL]
/recorddata = false
</trial>
Note: trial.probe_HLL
1. determines the position of the current probe
2. presents the probe in the low position
3. updates several measures
4. records the relevant data into the data file
<trial probe_HLL>
/ontrialbegin = [values.probetype = list.probetype.nextvalue]
/ontrialbegin = [values.probe_x = values.low_x]
/ontrialbegin = [values.probe_y = values.target_y]
/stimulusframes = [1 = probe]
/isvalidresponse = [trial.probe_HLL.response == values.responsekey_left || trial.probe_HLL.response == values.responsekey_right]
/monkeyresponse = (30, 35)
/iscorrectresponse = [(values.probetype == 1 && trial.probe_HLL.response == values.responsekey_left) ||
(values.probetype == 2 && trial.probe_HLL.response == values.responsekey_right) ]
/ontrialend = [if (trial.probe_HLL.correct && trial.probe_HLL.latency >= values.minimum_latency) {
values.sum_correct += 1;
values.sum_correct_probeinlowposition_simple += 1;
values.sumrt_probeinlowposition_simple += trial.probe_HLL.latency;
values.meanrt_probeinlowposition_simple = values.sumrt_probeinlowposition_simple/values.sum_correct_probeinlowposition_simple}]
/timeout = (values.probeduration)
/branch = [if (values.task == 1 && trial.probe_HLL.error) trial.feedback else trial.intertrialinterval]
</trial>
******************************************BOTTOM/TOP
Note: trial.fixation_HLL
1) presents the fixation stimulus in the center of the screen
2) calls trial.targets_HLL
3) does not record any data (by default)
<trial fixation_HLL_y>
/ontrialbegin = [values.congruence = 2]
/stimulusframes = [1 = eraser, fixation]
/timeout = values.fixationduration
/branch = [trial.targets_HLL_y]
/posttrialpause = values.fixation_posttrialpause
/recorddata = false
</trial>
Note: trial.targets_HLL
1) determines the itemnumber of the current image and whether to show it right or left
2) presents the two images for a set amount of time (values.targetduration)
3) calls trial.probe_HLH
4) does not record any data (by default)
<trial targets_HLL_y>
/ontrialbegin = [values.selecteditem = list.HLL_items.nextvalue]
/ontrialbegin = [if (values.selecteditem == "1A") {values.itemnumber = 1; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "1B") {values.itemnumber = 1; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "2A") {values.itemnumber = 2; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "2B") {values.itemnumber = 2; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "3A") {values.itemnumber = 3; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "3B") {values.itemnumber = 3; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "4A") {values.itemnumber = 4; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "4B") {values.itemnumber = 4; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "5A") {values.itemnumber = 5; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "5B") {values.itemnumber = 5; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "6A") {values.itemnumber = 6; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "6B") {values.itemnumber = 6; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "7A") {values.itemnumber = 7; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "7B") {values.itemnumber = 7; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "8A") {values.itemnumber = 8; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "8B") {values.itemnumber = 8; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "9A") {values.itemnumber = 9; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "9B") {values.itemnumber = 9; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "10A") {values.itemnumber = 10; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "10B") {values.itemnumber = 10; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "11A") {values.itemnumber = 11; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "11B") {values.itemnumber = 11; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "12A") {values.itemnumber = 12; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "12B") {values.itemnumber = 12; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "13A") {values.itemnumber = 13; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "13B") {values.itemnumber = 13; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "14A") {values.itemnumber = 14; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "14B") {values.itemnumber = 14; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "15A") {values.itemnumber = 15; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "15B") {values.itemnumber = 15; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "16A") {values.itemnumber = 16; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "16B") {values.itemnumber = 16; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "17A") {values.itemnumber = 17; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "17B") {values.itemnumber = 17; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "18A") {values.itemnumber = 18; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "18B") {values.itemnumber = 18; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "19A") {values.itemnumber = 19; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "19B") {values.itemnumber = 19; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "20A") {values.itemnumber = 20; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "20B") {values.itemnumber = 20; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "21A") {values.itemnumber = 21; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "21B") {values.itemnumber = 21; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "22A") {values.itemnumber = 22; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "22B") {values.itemnumber = 22; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "23A") {values.itemnumber = 23; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "23B") {values.itemnumber = 23; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/ontrialbegin = [if (values.selecteditem == "24A") {values.itemnumber = 24; values.highposition = 1; values.high_y = values.target_top_y; values.low_y = values.target_bottom_y}]
/ontrialbegin = [if (values.selecteditem == "24B") {values.itemnumber = 24; values.highposition = 2; values.high_y = values.target_bottom_y; values.low_y = values.target_top_y}]
/stimulusframes = [1 = highimage_y, lowimage_y]
/ontrialend = [values.highimage_y = picture.highimage_y.currentitem; values.lowimage_y = picture.lowimage_y.currentitem]
/timeout = expressions.targetduration
/posttrialpause = values.target_posttrialpause
/branch = [trial.probe_HLL_y]
/recorddata = false
</trial>
Note: trial.probe_HLL
1. determines the position of the current probe
2. presents the probe in the low position
3. updates several measures
4. records the relevant data into the data file
<trial probe_HLL_y>
/ontrialbegin = [values.probetype = list.probetype.nextvalue]
/ontrialbegin = [values.probe_x = values.target_x]
/ontrialbegin = [values.probe_y = values.low_y]
/stimulusframes = [1 = probe]
/isvalidresponse = [trial.probe_HLL_y.response == values.responsekey_left || trial.probe_HLL_y.response == values.responsekey_right]
/monkeyresponse = (30, 35)
/iscorrectresponse = [(values.probetype == 1 && trial.probe_HLL_y.response == values.responsekey_left) ||
(values.probetype == 2 && trial.probe_HLL_y.response == values.responsekey_right) ]
/ontrialend = [if (trial.probe_HLL_y.correct && trial.probe_HLL_y.latency >= values.minimum_latency) {
values.sum_correct += 1;
values.sum_correct_probeinlowposition_simple += 1;
values.sumrt_probeinlowposition_simple += trial.probe_HLL_y.latency;
values.meanrt_probeinlowposition_simple = values.sumrt_probeinlowposition_simple/values.sum_correct_probeinlowposition_simple}]
/timeout = (values.probeduration)
/branch = [if (values.task == 1 && trial.probe_HLL_y.error) trial.feedback else trial.intertrialinterval]
</trial>
Probe in "Peudohigh" Position (HLH) : Trial Sequence
because there is no high in the filler trials
one item of the filler pairs is considered
a pseudo-high for the purpose of this script
********************************************
Note: trial.fixation_filler_HHH
1) presents the fixation stimulus in the center of the screen
2) calls trial.targets_HLH
3) does not record any data (by default)
<trial fixation_filler_HHH>
/ontrialbegin = [values.congruence = 0]
/stimulusframes = [1 = eraser, fixation]
/timeout = values.fixationduration
/branch = [trial.targets_filler_HHH]
/posttrialpause = values.fixation_posttrialpause
/recorddata = false
</trial>
Note: trial.targets_filler_HHH
1) determines the itemnumber of the current image and whether to show it right or left
2) presents the two images for a set amount of time (values.targetduration)
3) calls trial.probe_filler_HHH
4) does not record any data (by default)
<trial targets_filler_HHH>
/ontrialbegin = [values.selecteditem = list.filler_HHH_items.nextvalue]
/ontrialbegin = [if (values.selecteditem == "1A") {values.itemnumber = 1; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "1B") {values.itemnumber = 1; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "2A") {values.itemnumber = 2; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "2B") {values.itemnumber = 2; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "3A") {values.itemnumber = 3; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "3B") {values.itemnumber = 3; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "4A") {values.itemnumber = 4; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "4B") {values.itemnumber = 4; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "5A") {values.itemnumber = 5; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "5B") {values.itemnumber = 5; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "6A") {values.itemnumber = 6; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "6B") {values.itemnumber = 6; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "7A") {values.itemnumber = 7; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "7B") {values.itemnumber = 7; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "8A") {values.itemnumber = 8; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "8B") {values.itemnumber = 8; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "9A") {values.itemnumber = 9; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "9B") {values.itemnumber = 9; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "10A") {values.itemnumber = 10; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "10B") {values.itemnumber = 10; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "11A") {values.itemnumber = 11; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "11B") {values.itemnumber = 11; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "12A") {values.itemnumber = 12; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "12B") {values.itemnumber = 12; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "13A") {values.itemnumber = 13; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "13B") {values.itemnumber = 13; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "14A") {values.itemnumber = 14; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "14B") {values.itemnumber = 14; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "15A") {values.itemnumber = 15; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "15B") {values.itemnumber = 15; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "16A") {values.itemnumber = 16; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "16B") {values.itemnumber = 16; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "17A") {values.itemnumber = 17; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "17B") {values.itemnumber = 17; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "18A") {values.itemnumber = 18; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "18B") {values.itemnumber = 18; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "19A") {values.itemnumber = 19; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "19B") {values.itemnumber = 19; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "20A") {values.itemnumber = 20; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "20B") {values.itemnumber = 20; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "21A") {values.itemnumber = 21; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "21B") {values.itemnumber = 21; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "22A") {values.itemnumber = 22; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "22B") {values.itemnumber = 22; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "23A") {values.itemnumber = 23; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "23B") {values.itemnumber = 23; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/ontrialbegin = [if (values.selecteditem == "24A") {values.itemnumber = 24; values.highposition = 1; values.high_x = values.target_right_x; values.low_x = values.target_left_x}]
/ontrialbegin = [if (values.selecteditem == "24B") {values.itemnumber = 24; values.highposition = 2; values.high_x = values.target_left_x; values.low_x = values.target_right_x}]
/stimulusframes = [1 = highimage, lowimage]
/ontrialend = [values.highimage = picture.highimage.currentitem; values.lowimage = picture.fillerhighimage.currentitem]
/timeout = expressions.targetduration
/posttrialpause = values.target_posttrialpause
/branch = [trial.probe_filler_HHH]
/recorddata = false
</trial>
Note: trial.probe_filler_HHH
1. the position of the current probe
2. presents the probe in the high position
3. updates several measures
4. records the relevant data into the data file
<trial probe_filler_HHH>
/ontrialbegin = [values.probetype = list.probetype.nextvalue]
/ontrialbegin = [values.probe_x = values.high_x]
/ontrialbegin = [values.probe_y = values.target_y]
/stimulusframes = [1 = probe]
/isvalidresponse = [trial.probe_filler_HHH.response == values.responsekey_left || trial.probe_filler_HHH.response == values.responsekey_right]
/monkeyresponse = (30, 35)
/iscorrectresponse = [(values.probetype == 1 && trial.probe_filler_HHH.response == values.responsekey_left) ||
(values.probetype == 2 && trial.probe_filler_HHH.response == values.responsekey_right) ]
/timeout = (values.probeduration)
/branch = [if (values.task == 1 && trial.probe_filler_HHH.error) trial.feedback else trial.intertrialinterval]
</trial>
<trial rest>
/trialduration = 25000
/stimulusframes= [1 = break1]
/recorddata = false
/branch = [trial.rest2]
</trial>
<trial rest2>
/timeout = 5000
/stimulusframes= [1 = break2]
</trial>
********************************************
Miscelleneous trials
********************************************
<trial feedback>
/stimulusframes = [1 = feedback]
/timeout = 500
/recorddata = false
/branch = [trial.intertrialinterval]
</trial>
<trial intertrialinterval>
/timeout = expressions.probe_posttrialpause
/recorddata = false
</trial>
*******************************************************************************************************************
*******************************************************************************************************************
EXPERIMENTAL BLOCKS
*******************************************************************************************************************
*******************************************************************************************************************
Note:
* presents 10 practice trials (see Miller & Fillmore, 2010)
<block Practice>
/onblockbegin = [values.task = 1]
/postinstructions = (practice)
/trials = [1-10 = noreplace(fixation_HLH, fixation_HLL, fixation_filler_HHH, fixation_filler_LLL, fixation_HLH_y, fixation_HLL_y, fixation_filler_HHH_y, fixation_filler_LLL_y)]
</block>
Note: presents 160 trials, randomly samples from all 4 conditions
<block highDotProbeTask>
/onblockbegin = [values.task = 2]
/onblockbegin = [values.sum_correct = 0;
values.sum_correct_probeinhighposition_simple = 0;
values.sum_correct_probeinlowposition_simple= 0;
values.sumrt_probeinhighposition_simple = 0;
values.sumrt_probeinlowposition_simple = 0;
values.meanrt_probeinhighposition_simple = 0;
values.meanrt_probeinlowposition_simple = 0]
/trials = [1-40, 42-81, 83-122, 124-163 = noreplace(fixation_HLH, fixation_HLL, fixation_filler_HHH, fixation_filler_LLL, fixation_HLH_y, fixation_HLL_y, fixation_filler_HHH_y, fixation_filler_LLL_y); 41, 82, 123 = rest]
</block>
*******************************************************************************************************************
*******************************************************************************************************************
EXPERIMENT
*******************************************************************************************************************
*******************************************************************************************************************
<expt >
/preinstructions = (instructions)
/postinstructions = (thankyou)
/blocks = [1 = Practice; 2 = highDotProbeTask]
</expt>
Note: debug element
<monkey>
/ latencydistribution = normal(300, 50)
</monkey>