RE: only continue after pressing two keys?

Back

Home
»
Millisecond Forums
»
Inquisit 4
»
RE: only continue after pressing two keys?

only continue after pressing two keys?

Author	Message
neusch	neusch posted 10 Years Ago HOT Topic Details Share Topic
Group: Forum Members Posts: 3, Visits: 14	Hello everyone! I designed an experiment, where participants should react to stimuli by releasing one out of two keys (here: "A" and "L"). My question is: How can I make sure, that both keys are pressed, before the stimulus is presented? I already created a message ("Please press the keys "A" and "L" now" = presskeyremind). I only want to measure the time from the presentation of the stimulus until the release of one of the keys. The trials look like this so far: <trial practice> / stimulustimes = [0=presskeyremind; ????=stimulus] / correctresponse = (-30) / validresponse = (-38) </trial> Thanks for your Help! Tags release
	Reply Like 109
Dave	Dave posted 10 Years Ago ANSWER Post Details Share Post
Group: Administrators Posts: 13K, Visits: 103K	I'm having trouble understanding the question. #1: If you have two possible response options (1=release of key A, 2=release of key B), your <trial>'s /validresponse attribute should reflect that: / validresponse = (-30,-38) #2: Re. "I only want to measure the time from the presentation of the stimulus until the release of one of the keys." If your trial is set up to register key release, it is a logical necessity that the respective key(s) have been pressed beforehand. The way your trial is set up, it will terminate upon the first release of one of the two allowable keys detected after the presentation of "stimulus". Latency is measured relative to the presentation of "stimulus", which appears to be exactly what you want. Or am I missing something here? #3: As a general matter re. "How can I make sure, that both keys are pressed, before the stimulus is presented?" You cannot. A <trial> in Inquisit collects a single response, i.e. you cannot effectively make sure that both keys are in depressed state prior to presenting a stimulus -- it's impossible to do within a single <trial> element, and could be done only imperfectly using several "chained" <trial> elements <trial presskeytrial> / stimulusframes = [1=presskeyremind] / validresponse = (30,38) / branch = [trial.releasekeytrial] </trial> <trial releasekeytrial> / stimulusframes = [1=stimulus] / validresponse = (-30,-38) / correctresponse = (-30) </trial> which can only ensure that at least one of the keys was pressed prior to starting the stimulus-dislay trial that registers a single key's release. Hope this clarifies.
	Reply Like 102
neusch	neusch posted 10 Years Ago ANSWER Post Details Share Post
Group: Forum Members Posts: 3, Visits: 14	Thanks for your answer Dave! This is exactly what I needed. I have only two questions left: 1. / validresponse = (30,38) means validresponse = "A" OR "L" Is it possible to have something like validresponse = "A" AND "L" to ensure that both keys are pressed? 2. In your version with "chained" <trial> elements: How can I randomize the stimuli in the second trial in my <block>? / validresponse = (30,38) / validresponse = (30,38) / validresponse = (30,38) / validresponse = (30,38) / validresponse = (30,38)
	Reply Like 112
Dave	Dave posted 10 Years Ago ANSWER Post Details Share Post
Group: Administrators Posts: 13K, Visits: 103K	Re. #1: No. A <trial> can only ever register a single response event, i.e. a single key press or release, a single mouse click, etc. It cannot be made to register several events and treat them as a single response. Re. #2: You do that in exactly the same way as you would without it. Not sure what exactly the misconception is here, so please elaborate.
	Reply Like 101
neusch	neusch posted 10 Years Ago ANSWER Post Details Share Post
Group: Forum Members Posts: 3, Visits: 14	Thank you for your help! I found a solution for the randomization now and I solved the problem with the "press TWO keys" by constructing three chained trials (Presskey_a --> Presskey_l --> present stimulus). Have a nice day! <trial presskeytrial> / stimulusframes = [1=presskeyremind] / validresponse = (30,38) / branch = [trial.releasekeytrial] </trial> - See more at: http://www.millisecond.com/forums/Post.aspx?TopicID=13715&PageIndex=1&Task=PostTopicReply&ParentID=13715&Update=1#sthash.5VZEjV3W.dpuf
	Reply Like 122
Dave	Dave posted 10 Years Ago ANSWER Post Details Share Post
Group: Administrators Posts: 13K, Visits: 103K	Great, thanks for the update. One remark: > I solved the problem with the "press TWO keys" by constructing three chained trials (Presskey_a --> Presskey_l --> present stimulus). The reason I did not propose something like this is that it suffers from the same problem as the "two-chained-trials"-approach: Nothing prevents you from releasing the A-key in the Presskey_I-trial. Thus there is no guarantee that both keys are indeed in depressed state when you start the "stimulus presenation"-trial.
	Reply Like 100