adopted Columbia Card Task

Back

adopted Columbia Card Task

Author	Message
minin72704	minin72704 posted 9 Years Ago HOT Topic Details Share Topic
Group: Forum Members Posts: 51, Visits: 189	Hello, I am totally new to Inquisit. I downloaded the CCT and made couple of modifications, such as reduced cards to 6. My questions are as following: 1. how to randomly choose cards from one of six cards by pressing "take card" button until subjects want to stop (by pressing the same button). 2.I can't control the trial duration (10 seconds) by setting /response=timeout(10000), /timeout or /trialduration in <trial pickcard>. anyone can help me modify the syntax in the attachment, thanks. Attachments Block1_CCT_Hot_withinstruction-2.iqx (697 views, 32.00 KB)
	Reply Like 70

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

adopted Columbia Card Task

minin72704 - 9 Years Ago

Re.#1: See attached. Re. #2: You can of course set a 10000ms timeout....

Dave - 9 Years Ago

Hello, Dave I am greatly appreciate for your immediate reply. Thank...

minin72704 - 9 Years Ago

Hello, dear Dave, I read "Inquist 4 Help". However, I did my best but...

minin72704 - 9 Years Ago

If you merely want to present the two *tasks* (hot and cold; 8 trials...

Dave - 9 Years Ago

Hello, Dave, I tried your suggestion, and it works but weird (see...

minin72704 - 9 Years Ago

What your <include> element does is simply copy-paste the two...

Dave - 9 Years Ago

Hello Dave, Following your suggestion, I made some modification. I...

minin72704 - 9 Years Ago

For the first question, specifically, I added one trial (<trial...

minin72704 - 9 Years Ago

hi, Dave: The first problem was already solved. However, the second...

minin72704 - 9 Years Ago

Hi, Dave, I have already resolved all the questions mentioned above...

minin72704 - 9 Years Ago

Hi, Dave, I have two more questions about my adopted CCT. 1. How can...

minin72704 - 9 Years Ago

#1: <trial pickcard1> / ontrialend = [if...

Dave - 9 Years Ago

Hi, Dave, I have already resolved all the problems, thank you.

minin72704 - 9 Years Ago

Hi, Dave, I want to use Lumina response pad (with two buttons each...

minin72704 - 9 Years Ago

No, simply changing the /inputdevice may not be enough. You also need...

Dave - 9 Years Ago

It sounds a little complex. I have another question, that is, why the...

minin72704 - 9 Years Ago

As far as I can tell the data is recorded exactly as specified in your...

Dave - 9 Years Ago

Hi, Dave, I finnally design to use current design- 8 Button Bimanual...

minin72704 - 9 Years Ago

I don't know which scancodes the Lumina box sends when used as a...

Dave - 9 Years Ago

I set following syntax and attempt to refer"0","1","2","3","4","5","6"...

minin72704 - 9 Years Ago

Now, my main concerns are how to convert default setting of mouse in...

minin72704 - 9 Years Ago

> "However, when I press 1 on keyboard, it record "2" in data."...

Dave - 9 Years Ago

I followed your suggestion and set 0 to scancode 11 (/ validresponse =...

minin72704 - 9 Years Ago

<trial pickcard1> / stimulusframes = [1=roundinfo1, debuginfo,...

Dave - 9 Years Ago

After I modified those you mentioned and rerun the script, the problem...

minin72704 - 9 Years Ago

That is exactly what the code does when you press the keys with the...

Dave - 9 Years Ago

Yes, I press the number keys at the top of my keyboard rather than the...

minin72704 - 9 Years Ago

I want participants to confirm their responses. If they press 1 but...

minin72704 - 9 Years Ago

Double-check you're code. You have an error in there somewhere. Again,...

Dave - 9 Years Ago

I check between yours and mine more than twenty times, but I really...

minin72704 - 9 Years Ago

I followed your suggestions to modify codes in CCT_hot, but it doesn't...

minin72704 - 9 Years Ago

I resolve the problems in CCT_cold, it resulted from setting of path.

minin72704 - 9 Years Ago

I resolved problems in CCT_hot, it resulted from the setting of path...

minin72704 - 9 Years Ago

Apologies for the delayed response. Great to hear you were able to...

Dave - 9 Years Ago

Hi, Dave, If i would like to give some feedbacks automatically (e.g....

minin72704 - 9 Years Ago

Set up a new <picture> element in the script that has the...

Dave - 9 Years Ago

Hi, Dave, I did it before i posting. However, it didn't work. The...

minin72704 - 9 Years Ago

attachment is below Hi, Dave, I did it before i posting. However, it...

minin72704 - 9 Years Ago

I resolved above mentioned problems. However, the feedbacks always...

minin72704 - 9 Years Ago

Moreover, there was always the same feedback presented. How can i make...

minin72704 - 9 Years Ago

#1: You can have multiple /responsemessage attributes tied to the same...

Dave - 9 Years Ago

Thanks for your instruction. I hae another problem, that is, I set...

minin72704 - 9 Years Ago

If you want the trial to have a fixed duration, do <trial...

Dave - 9 Years Ago

Thanks for your help. In addition, I have another question about BARTY...

minin72704 - 9 Years Ago

The script works as expected for me. A partial data file is attached....

Dave - 9 Years Ago

I should add that there *is* one condition that will lead to the...

Dave - 9 Years Ago

It seems resulting in 15s wait after each press (pumpballoon). If i...

minin72704 - 9 Years Ago

> It seems resulting in 15s wait after each press (pumpballoon)....

Dave - 9 Years Ago

I set choicetimeout=15000 in <values> and set it...

minin72704 - 9 Years Ago

> then subtract the trial's latency from it at the end of <trial...

Dave - 9 Years Ago

This is above mentioned attachment.

minin72704 - 9 Years Ago

I add two conditions: 1. / branch = [if ( values.pumpcount ==...

minin72704 - 9 Years Ago

Both don't make sense. You don't need new branches and you definitely...

Dave - 9 Years Ago

Fistly, in your last attachment, the trials didn't terminate at 15s...

minin72704 - 9 Years Ago

If you want to have either <trial pop> or <trial collect>...

Dave - 9 Years Ago

Thnaks for your illustration. However, your second script works while...

minin72704 - 9 Years Ago

Both work just fine. As for the timing: See attached. Note: Giving...

Dave - 9 Years Ago

Thanks for your help. It looks great.

minin72704 - 9 Years Ago

It may be the last two questions (i hope so). First one, revised...

minin72704 - 9 Years Ago

> It may be the last two questions (i hope so). First one, revised...

Dave - 9 Years Ago

Thanks for your help.

minin72704 - 9 Years Ago

Hi, Dave, I really confused about the time control. I set a trial's...

minin72704 - 9 Years Ago

> I know it works by setting trialduration to 9s Then please use...

Dave - 9 Years Ago

I finally found that the trial duration of CCT_hot within a round was...

minin72704 - 9 Years Ago

I finally found that the trial duration of CCT_hotwithin a round was...

minin72704 - 9 Years Ago

You do it in the same way as with the BARTY, which we discussed in...

Dave - 9 Years Ago

I add / branch = [if...

minin72704 - 9 Years Ago

I revised the script as you mentioned in former post (please see the...

minin72704 - 9 Years Ago

Just as with the BARTY, you ought to set the timeout variable to 10...

Dave - 9 Years Ago

Thanks Dave, I love you.

minin72704 - 9 Years Ago

Thanks :) You just made my day!

Dave - 9 Years Ago

There is another problem. I found a discrepancy between two scores in...

minin72704 - 9 Years Ago

It appears to happening only when i press pick card button and then do...

minin72704 - 9 Years Ago

Re. the scoring: Work through the code that is responsible for that...

Dave - 9 Years Ago

I resulved part of problems, however, I still can't figure out how to...

minin72704 - 9 Years Ago

Look at <trial pickcard> ... / ontrialend =...

Dave - 9 Years Ago

It is weired that it only happened when I turn over the last safe...

minin72704 - 9 Years Ago

> For example, if there were 3 loss cards in a round, the points...

Dave - 9 Years Ago

Could you help me modify it, because I have to implement it a few...

minin72704 - 9 Years Ago

Thanks Dave, you help me resolved all the (stupid) problems. I love...

minin72704 - 9 Years Ago

Thank you very much for the kind words and I wish you much success...

Dave - 9 Years Ago

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook

Millisecond Forums