Millisecond Forums

+x

 

anisa_khalfan - 3/19/2021

Hi, 
I am running into a bit of an issue with this study I am making. Basically there are orange and purple faces and each block has a different sorting rule (e.g., respond to gender if it is orange, and respond to emotion if it is purple). 

Is there a way to set up the correct response so that it depends on the trial's a) colour of the presented face, and b) current sorting rule 
Right now, I am having to hard code each of the different trial types (orange, male, angry - sorting rule 1/ orange, male, neutral - sorting rule 1/ orange, female, angry -sorting rule 1 etr...) since each will have a different response. 

O = orange, P = purple, M = male, F = female, N = neutral, A = angry
Here are a few of my trials right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PMN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PMN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PFN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PFN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_OFA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OFA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (203)
</trial>

I would appreciate any help! I have spent the last week looking through past questions and came up short.

+x

 

Dave - 3/19/2021

+x

 

anisa_khalfan - 3/19/2021

Hi, 
I am running into a bit of an issue with this study I am making. Basically there are orange and purple faces and each block has a different sorting rule (e.g., respond to gender if it is orange, and respond to emotion if it is purple). 

Is there a way to set up the correct response so that it depends on the trial's a) colour of the presented face, and b) current sorting rule 
Right now, I am having to hard code each of the different trial types (orange, male, angry - sorting rule 1/ orange, male, neutral - sorting rule 1/ orange, female, angry -sorting rule 1 etr...) since each will have a different response. 

O = orange, P = purple, M = male, F = female, N = neutral, A = angry
Here are a few of my trials right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PMN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PMN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PFN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PFN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_OFA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OFA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (203)
</trial>

I would appreciate any help! I have spent the last week looking through past questions and came up short.

You'll want to make use of appropriate logic per /iscorrectresponse (not /correctresponse). How that would have to look in your case is impossible to say based on the little information and code you provided.

+x

 

anisa_khalfan - 3/19/2021

+x

 

Dave - 3/19/2021

+x

 

anisa_khalfan - 3/19/2021

Hi, 
I am running into a bit of an issue with this study I am making. Basically there are orange and purple faces and each block has a different sorting rule (e.g., respond to gender if it is orange, and respond to emotion if it is purple). 

Is there a way to set up the correct response so that it depends on the trial's a) colour of the presented face, and b) current sorting rule 
Right now, I am having to hard code each of the different trial types (orange, male, angry - sorting rule 1/ orange, male, neutral - sorting rule 1/ orange, female, angry -sorting rule 1 etr...) since each will have a different response. 

O = orange, P = purple, M = male, F = female, N = neutral, A = angry
Here are a few of my trials right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PMN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PMN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PFN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PFN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_OFA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OFA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (203)
</trial>

I would appreciate any help! I have spent the last week looking through past questions and came up short.

You'll want to make use of appropriate logic per /iscorrectresponse (not /correctresponse). How that would have to look in your case is impossible to say based on the little information and code you provided.

So if I have these items:

<item training_OMN>
/1 = "077_m_m_n_b.jpg"
</item>

<item training_OMA>
/1 = "082_m_m_a_b.jpg"
</item>

<item training_OFA>
/1 = "088_o_f_a_a.jpg"
</item>

<item training_OFN>
/1 = "097_m_f_n_b.jpg"
</item>
<item error>
/1 = "X"
</item>

<item Sorting_Rule_Block1>
/1 = "
Orange = Gender
Purple = Emotion
"
</item>

<item RM_left_Block1>
/1 = "Woman
Angry"
</item>

<item RM_right_Block1>
/1 = "Man
Neutral"
</item>

<item fixation>
/1 = "+"
</item>

<item right>
/1 = "right.jpg"
</item>

<item left>
/1 = "left.jpg"
</item>

<picture training_OMN>
/ items = training_OMN
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OMA>
/ items = training_OMA
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OFA>
/ items = training_OFA
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OFN>
/ items = training_OFN
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<text fixation>
/ items = fixation
/ position = (50%,50%)
/ txcolor = black
</text>

<text error>
/ items = error
/ position = (50%,50%)
/ txbgcolor = transparent
/ txcolor = black
</text>

<picture right>
/ items = left
/ size = (10%,10%)
/ position = (30%, 50%)
</picture>

<picture left>
/ items = right
/ size = (10%,10%)
/ position = (70%, 50%)
</picture>

<text Sorting_Rule_1>
/ items = Sorting_Rule_Block1
/ position = (50%, 14%)
/ txcolor = black
</text>

<text RM_left_Block1>
/ items = RM_left_Block1
/ position = (20%, 50%)
/ txcolor = black
</text>

<text RM_right_Block1>
/ items = RM_right_Block1
/ position = (80%, 50%)
/ txcolor = black
</text>

<shape rectangle>
/ color = (220,220,220)
/ size = (100%,100%)
</shape>


And I want to create one trial instead of 4 separate ones for the 4 training_OMN, _OMA, _OFA, _OFN, such that if OMN, or OMA are the faces presented the correct response == 205, but if OFA, or OFN are the ones presented the correct response == 203.

How would I go about doing this?

This is how I am creating the trial for one face right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

+x

 

anisa_khalfan - 3/19/2021

+x

 

Dave - 3/19/2021

+x

 

anisa_khalfan - 3/19/2021

Hi, 
I am running into a bit of an issue with this study I am making. Basically there are orange and purple faces and each block has a different sorting rule (e.g., respond to gender if it is orange, and respond to emotion if it is purple). 

Is there a way to set up the correct response so that it depends on the trial's a) colour of the presented face, and b) current sorting rule 
Right now, I am having to hard code each of the different trial types (orange, male, angry - sorting rule 1/ orange, male, neutral - sorting rule 1/ orange, female, angry -sorting rule 1 etr...) since each will have a different response. 

O = orange, P = purple, M = male, F = female, N = neutral, A = angry
Here are a few of my trials right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PMN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PMN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PFN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PFN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_OFA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OFA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (203)
</trial>

I would appreciate any help! I have spent the last week looking through past questions and came up short.

You'll want to make use of appropriate logic per /iscorrectresponse (not /correctresponse). How that would have to look in your case is impossible to say based on the little information and code you provided.

So if I have these items:

<item training_OMN>
/1 = "077_m_m_n_b.jpg"
</item>

<item training_OMA>
/1 = "082_m_m_a_b.jpg"
</item>

<item training_OFA>
/1 = "088_o_f_a_a.jpg"
</item>

<item training_OFN>
/1 = "097_m_f_n_b.jpg"
</item>
<item error>
/1 = "X"
</item>

<item Sorting_Rule_Block1>
/1 = "
Orange = Gender
Purple = Emotion
"
</item>

<item RM_left_Block1>
/1 = "Woman
Angry"
</item>

<item RM_right_Block1>
/1 = "Man
Neutral"
</item>

<item fixation>
/1 = "+"
</item>

<item right>
/1 = "right.jpg"
</item>

<item left>
/1 = "left.jpg"
</item>

<picture training_OMN>
/ items = training_OMN
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OMA>
/ items = training_OMA
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OFA>
/ items = training_OFA
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OFN>
/ items = training_OFN
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<text fixation>
/ items = fixation
/ position = (50%,50%)
/ txcolor = black
</text>

<text error>
/ items = error
/ position = (50%,50%)
/ txbgcolor = transparent
/ txcolor = black
</text>

<picture right>
/ items = left
/ size = (10%,10%)
/ position = (30%, 50%)
</picture>

<picture left>
/ items = right
/ size = (10%,10%)
/ position = (70%, 50%)
</picture>

<text Sorting_Rule_1>
/ items = Sorting_Rule_Block1
/ position = (50%, 14%)
/ txcolor = black
</text>

<text RM_left_Block1>
/ items = RM_left_Block1
/ position = (20%, 50%)
/ txcolor = black
</text>

<text RM_right_Block1>
/ items = RM_right_Block1
/ position = (80%, 50%)
/ txcolor = black
</text>

<shape rectangle>
/ color = (220,220,220)
/ size = (100%,100%)
</shape>


And I want to create one trial instead of 4 separate ones for the 4 training_OMN, _OMA, _OFA, _OFN, such that if OMN, or OMA are the faces presented the correct response == 205, but if OFA, or OFN are the ones presented the correct response == 203.

How would I go about doing this?

This is how I am creating the trial for one face right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

+x

 

anisa_khalfan - 3/19/2021

+x

 

anisa_khalfan - 3/19/2021

+x

 

Dave - 3/19/2021

+x

 

anisa_khalfan - 3/19/2021

Hi, 
I am running into a bit of an issue with this study I am making. Basically there are orange and purple faces and each block has a different sorting rule (e.g., respond to gender if it is orange, and respond to emotion if it is purple). 

Is there a way to set up the correct response so that it depends on the trial's a) colour of the presented face, and b) current sorting rule 
Right now, I am having to hard code each of the different trial types (orange, male, angry - sorting rule 1/ orange, male, neutral - sorting rule 1/ orange, female, angry -sorting rule 1 etr...) since each will have a different response. 

O = orange, P = purple, M = male, F = female, N = neutral, A = angry
Here are a few of my trials right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PMN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PMN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_PFN>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_PFN, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>

<trial training_OFA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OFA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (203)
</trial>

I would appreciate any help! I have spent the last week looking through past questions and came up short.

You'll want to make use of appropriate logic per /iscorrectresponse (not /correctresponse). How that would have to look in your case is impossible to say based on the little information and code you provided.

So if I have these items:

<item training_OMN>
/1 = "077_m_m_n_b.jpg"
</item>

<item training_OMA>
/1 = "082_m_m_a_b.jpg"
</item>

<item training_OFA>
/1 = "088_o_f_a_a.jpg"
</item>

<item training_OFN>
/1 = "097_m_f_n_b.jpg"
</item>
<item error>
/1 = "X"
</item>

<item Sorting_Rule_Block1>
/1 = "
Orange = Gender
Purple = Emotion
"
</item>

<item RM_left_Block1>
/1 = "Woman
Angry"
</item>

<item RM_right_Block1>
/1 = "Man
Neutral"
</item>

<item fixation>
/1 = "+"
</item>

<item right>
/1 = "right.jpg"
</item>

<item left>
/1 = "left.jpg"
</item>

<picture training_OMN>
/ items = training_OMN
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OMA>
/ items = training_OMA
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OFA>
/ items = training_OFA
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<picture training_OFN>
/ items = training_OFN
/ size = (42%, 42%)
/ position = (50%,50%)
</picture>

<text fixation>
/ items = fixation
/ position = (50%,50%)
/ txcolor = black
</text>

<text error>
/ items = error
/ position = (50%,50%)
/ txbgcolor = transparent
/ txcolor = black
</text>

<picture right>
/ items = left
/ size = (10%,10%)
/ position = (30%, 50%)
</picture>

<picture left>
/ items = right
/ size = (10%,10%)
/ position = (70%, 50%)
</picture>

<text Sorting_Rule_1>
/ items = Sorting_Rule_Block1
/ position = (50%, 14%)
/ txcolor = black
</text>

<text RM_left_Block1>
/ items = RM_left_Block1
/ position = (20%, 50%)
/ txcolor = black
</text>

<text RM_right_Block1>
/ items = RM_right_Block1
/ position = (80%, 50%)
/ txcolor = black
</text>

<shape rectangle>
/ color = (220,220,220)
/ size = (100%,100%)
</shape>


And I want to create one trial instead of 4 separate ones for the 4 training_OMN, _OMA, _OFA, _OFN, such that if OMN, or OMA are the faces presented the correct response == 205, but if OFA, or OFN are the ones presented the correct response == 203.

How would I go about doing this?

This is how I am creating the trial for one face right now:

<trial training_OMA>
/ validresponse = (203,205)
/ stimulustimes = [0 = rectangle; 100 = fixation; 750 = training_OMA, Sorting_Rule_1, RM_left_Block1, RM_right_Block1, right,left]
/ beginresponsetime = 750
/ correctresponse = (205)
</trial>