Group: Forum Members
Posts: 55,
Visits: 1
|
Hi all,
I've got a little problem using my cedrus response box (rb830). I installed the the driver from the cedrus homepage and now wanted to test it. I used the seriell port monitor to check whether I receive correct signals from the response box and I get them only for 6 of 8 keys. The keys top left and top right don't send signals (probabely they should send the scancodes 64 and 128 - because the others send 1, 2, 4, 8, 16 and 32).
First I thought that there is something damaged in my box, but meanwhile I tested seven different boxes and I get the same problem for all of them.
Can anyone help me solve that problem?
Best,
Andy
p.s. I set the baud rate to 9600 and I put the DIP switches 1,2,3 upward as described in the instructions (http://www.cedrus.com/support/rb_series/tn1044_dip_switches.htm)
p.p.s. I encounter the same problem using Inquisit2, too
|