Setting up Inquisit for use with fMRI

Author	Message
Dave	Dave posted 9 Years Ago ANSWER Post Details Share Post
Group: Administrators Posts: 13K, Visits: 104K	#1: No, there is no emulation mode or the like. #2: You should not use /pretrialsignal in your case. Instead use a standard <trial> element taking the input from the scanner as response. Run that trial 5 times. The exact settings you need depend on how your scanner is connected to the machine executing Inquisit (parallel port? serial port?) and the signal the scanner sends. #3: If you use a <trial> as indicated in #2, yes. #4: Since every external device works somewhat differently (cf. #2), no, I don't think there is one that would be useful for you.
	Reply Like 39
july1810	july1810 posted 9 Years Ago Topic Details Share Topic
Group: Forum Members Posts: 28, Visits: 213	Hello, for fMRI experiments I used Presentation in the past and somehow my mindset is stuck in this setting, so here are my questions: 1) Do I have the option to turn on an emulation mode to check that everything is working as expected, although I'm not at the scanner? 2) I found the pretrial signal attribute. However, I'd like Inquisit to wait for 5 pulses from the scanner and then start. Is this possible with this attribute or should I use something else? 3) Will the pulses from the scanner be written automatically in the logfile? 4) Is there maybe an example script in the library? Thank you for the answer. Best Julia
	Reply Like 27